SEnukeX SEO Software

Sunday, January 16, 2011

History of Fiber Optics Technology


In 1880 Alexander Graham Bell invented a light communications system called photo-phone using sunlight reflected from a voice-modulated thin mirror to bring the conversation. Photo-phone never achieved commercial success, although the system is working quite well. Here are some of the stages of historical development of optical fiber technology:

1.      First generation Instance (starting 1970)
System is still simple and the basis for the next generation system consists of:
Encoding: Changing input (eg voice) into electrical signals.Transmitter: Changing the electrical signals into modulated light wave, a LED with a wavelength of 0.87 μm. Silica Fibers: As an introduction to waves of light.Repeater: For a light wave amplifier which weakened on the road
Receiver: Change the modulated light waves into electrical signals, a photo-detector
Decoding: Changing the electrical signals into output (eg voice). Repeater works by converting light waves into electrical signals and then amplified electronically and converted back into light waves. In 1978 the transmission capacity can reach 10 Gb.km / s.
2.       Second generation (beginning in 1981)
To reduce the effect of dispersion, fiber core size minimized. The refractive index of the skin was made in close with the core refractive index. Using a laser diode, the emitted wavelength 1.3 μm. Transmission capacity to 100 Gb.km / s.
3.        Third generation (starting 1982)
Completion of the manufacture of silica fibers. Making a laser diode chip wavelength 1.55 μm.
Improved purity silica material so that transparency can be made for a wavelength of about 1.2 μm to 1.6 μm  Transmission capacity into several hundred Gb.km / s
4.        Fourth geneartion (starting 1984)
Commencement of research and development of a coherent system, rather than modulating the intensity modulation, but frequency modulation. In 1984 its capacity has been able to equal the capacity of a direct detection system (intensity modulation). Hampered its development because of technological tools and the source of the frequency modulation detection is still far behind.
5.       Fifth generation (beginning in 1989)
Developed an optical amplifier repeater function which replaces the previous generations.
In the early development of transmission capacity is only achieved 400 Gb.km / s but a year later the transmission capacity has penetrated 50,000 Gb.km / s!
6.       Top-Six generation?
In 1988 Linn F. Mollenauer pioneered optical soliton communication systems. Soliton is a pulse wave that consists of many components of different wavelengths and also varies only slightly in intensity. Soliton length is only 10 -12 seconds and can be divided into several components that are close together, so that the signals in the form of solitons is information that consists of multiple channels at once (wavelength division multiplexing). We experimentally demonstrated that solitons can carry a minimum of 5 channels, each of which carries information at a rate of 5 Gb / s. Transmission capacity has been tested 35,000 Gb.km / s. The workings of this system is the effect of Kerr solitons, ie the rays will travel the same wavelength at different rates within a material when its intensity exceeds a limit price. This effect is then used to neutralize the effects of dispersion, so that the soliton does not widen at a time until the receiver. This is very advantageous because the resulting error rate is very small and even negligible.



Although the light propagates along the fiber core without the layer of leather material, but the skin has several functions:
- Reduce the loss of light from the core to the surrounding air.
- Reduce the scattering loss at the core surface.
- Protects the fiber from contamination of surface absorption.
- Increasing the mechanical strength.
If the difference in the refractive index of the core and made drastic skin called the optical fiber Step index (SI), the difference between skin and core refractive index is symbolized by Δ, where:


For additional protection, leather wrapped by an additional layer (made of certain types of plastic) which is a coat or a buffer to protect the optical fiber from physical damage.Buffer is elastic, prevent abrasion and prevent loss due to scattering microbends.

2.flow of Fiber Optic Light Inside

The concept of propagation of light in optical fibers, can be reviewed by two approaches / theories of geometric optics in which light rays are seen as fulfilling the laws of geometric light (reflection and refraction) and physical optics in which light is seen as an electro-magnetic waves (mode theory) . Overview of Geometric Optics  Gives a clear picture of the propagation of light along optical fibers. Two types of rays can propagate along optical fibers where the light rays propagate meridian cuts the optical fiber axis and the skew ray in which the rays do not propagate through the fiber optic axis. Meridian-ray beam can be classified into bound and unbound rays. Bound rays in optical fiber due to total reflection, in which order these events occur then the beam entering the fiber core must be cut border skin with a greater angle than the critical angle, the EC, so that light can propagate along the fiber.

Overview of physical optics
Approach as a ray of light just to explain how the direction of a plane wave propagating in a fiber but does not review other properties of plane waves of interference, in which the plane waves interfere with each other along the propagation, so that only the types of certain plane waves which can propagate along the fiber . It would require a review of physical optics is looking at light as an electromagnetic wave is called the theory of modes.
The theory used to explain the mode in addition to the types of plane waves which can propagate along the fiber, also for explaining the properties of optical fibers such as absorption, attenuation and dispersion.
Mode is a "configuration of light propagation in optical fibers that provide the transverse electric field distribution in a stable (unchanged throughout the propagation of light in the direction of the axis) so that light can be guided in the fiber optics" (Introduction To Optical Fiber Communication, Yasuharu Suematsu, Ken - Ichi Iga). Collection of electromagnetic waves guided in the optical fiber are called modes.
View mode theory of light as a plane wave which is expressed in the direction, amplitude and wavelength of perambatannya. Plane wave is a wave surface (which on the surface of this phase of his constant, called a wavefront) is an infinite flat plane perpendicular to the direction of propagation. Relationships wavelength, propagation speed and wave frequency in a medium.


Why is fiber optic system is said to revolutionize the world telekomunikiasi? is because compared with the conventional system using metal wires (copper) used, the optical fiber having:

Less expensive - Several miles of optical cable can be made cheaper than copper wires of equal length.

Thinner - Optical fibers can be made with smaller diameter (the size of the skin of the fiber diameter about 100 μm and total diameter coupled with a protective jacket around 1-2 mm) than copper wires, and also because the optical fiber carrying light (light) then it certainly has a light weight (reduced weight). So fiber-optic cables take a smaller place in the soil.

Higher carrying capacity - Because optical fibers are thinner than copper wires then most of the optical fiber can be bundled into a cable with a certain diameter of the multiple telephone lines may be on the same cable or more channels on cable TV can be through cable. Fiber optics also has a large bandwidth (1 and 100 GHz, for multimode and single-mode along the 1 km).

Less signal degradation - The signal loss in optical fibers is smaller (less than 1 dB / km at a wide range of wavelengths) as compared with copper wire.

Message Origin
Message origin can be a non-electric physical quantities (sound or picture), so that the necessary transducers (sensors) that alter message from form to form a non-electric power.
A common example is a microphone to change sound waves into electrical currents and video cameras (CCD) transforms the image into electrical current.

Modulator and Carrier Source
Have two main functions, the first electrically changing message into a form suitable, both laid it on the signal generated by carrier wave source.
Modulation formats can be differentiated into analog and digital modulation.
In digital modulation for laying the digital data signal on a carrier wave, the modulator simply just to on his or her right off the carrier signal source according to his data.
Carrier sourc membangkitkankan light waves, which are commonly used Laser Diode (LD) or Light Emitting Diode (LED).

Channel Coupler
To channel the power of light waves that have been modulated from the carrier source to the information channel (fiber optics).
Is an important part of the design of optical fiber communication systems because the possibility of loss is high.

Information Channel (Fibre Optics)
Desirable characteristics of optical fibers is attenuation and low-angle light-cone of acceptance.
Amplifier connections required at the very long (hundreds or thousands of kilometers) in order to have sufficient power to the receiver.
Repeaters can be used only for the digital system, which serves to change the weak optical signal into electrical form and then strengthened and restored to form an optical signal for subsequent transmission.
Time propagation of light in an optical fiber depends on the frequency of light and the path through which, the signal light propagating in optical fibers have the different frequencies within a certain range (the width of the frequency spectrum) and powernya divided over different paths, different, this causes a distortion in the signal.
In digital systems this distortion in the form of widening (dispersion) of digital pulses that propagate in the fiber optics, is increasingly widening with increasing distance traveled and the widening of this will overlap with other pulses, it will cause errors in signal detection. The existence of dispersion limit the speed of information (on speed digital information system called the data rate measured in bits per second (bps)) that can be delivered.
On the phenomenon of optical solitons, dispersion effect is balanced by nonlinear effects of optical fibers so that the pulse signal can propagate without changing shape (not dilated).

Detector and Amplifier
Used photo-detectors (photo-diode, photo transistor, etc.) that serves to change the received optical signals into electrical signals.

Signal Processor
For analog transmission, the signal processor consists of strengthening and signal filtering. Filtering aims to maximize the ratio of signal power to signal power that is not diinginakan. Random fluctuations that exist in the received signal is referred to as noise. How does this noise on the communication system is determined by the amount of SNR (Signal to Noise Ratio), the ratio of signal power to noise power, usually expressed in desi-Bell (dB), the greater the SNR the better the quality of the communication system to noise.
For digital systems, signal processor consists of strengthening and filtering the signal and sets of decision makers.
The series of these decision makers to decide whether a binary 0 or 1 is received during the time slot of each individual bit. Because of the noise that can not be eliminated then there is always the possibility of errors of this decision-making process, expressed in magnitude Bit Error Rate (BER) that its value should be small in communication.
If the data is transmitted is an analog (eg voice), but is transmitted digitally over fiber optics (the transmitter is required Analog to Digital Converter (ADC) before incoming signal modulator) is also required Digital to Analog Converter (DAC) to signal processor, to transform digital data into analog, prior to release to the output (eg speaker).


Message Output
If the resulting output are presented directly to the people, who hear or see such information, then the output is still in the form of electrical signals to be converted into sound waves or visual image. Transducer (actuator) for this are the speakers for the audio message and a cathode ray tube (CRT) (or others such as LCD, OLED, etc.) for the visual image.
In some situations such as in systems in which computers or other machines connected together via a fiber optic system, then the output in the form of electrical signals can directly be used. This is also when the optical fiber system is only part of a larger network, as in a fiber link between the telephone exchange or a fiber trunk line carrying a number of television programs, in this case includes the distribution of processing electrical signals to certain goals desired. Equipment at the ouput message is simple only in the form of an electrical connector to the signal processor the next system.

History of Fiber Optics Technology


In 1880 Alexander Graham Bell invented a light communications system called photo-phone using sunlight reflected from a voice-modulated thin mirror to bring the conversation. Photo-phone never achieved commercial success, although the system is working quite well. Here are some of the stages of historical development of optical fiber technology:

1.      First generation Instance (starting 1970)
System is still simple and the basis for the next generation system consists of:
Encoding: Changing input (eg voice) into electrical signals.Transmitter: Changing the electrical signals into modulated light wave, a LED with a wavelength of 0.87 μm. Silica Fibers: As an introduction to waves of light.Repeater: For a light wave amplifier which weakened on the road
Receiver: Change the modulated light waves into electrical signals, a photo-detector
Decoding: Changing the electrical signals into output (eg voice). Repeater works by converting light waves into electrical signals and then amplified electronically and converted back into light waves. In 1978 the transmission capacity can reach 10 Gb.km / s.
2.       Second generation (beginning in 1981)
To reduce the effect of dispersion, fiber core size minimized. The refractive index of the skin was made in close with the core refractive index. Using a laser diode, the emitted wavelength 1.3 μm. Transmission capacity to 100 Gb.km / s.
3.        Third generation (starting 1982)
Completion of the manufacture of silica fibers. Making a laser diode chip wavelength 1.55 μm.
Improved purity silica material so that transparency can be made for a wavelength of about 1.2 μm to 1.6 μm  Transmission capacity into several hundred Gb.km / s
4.        Fourth geneartion (starting 1984)
Commencement of research and development of a coherent system, rather than modulating the intensity modulation, but frequency modulation. In 1984 its capacity has been able to equal the capacity of a direct detection system (intensity modulation). Hampered its development because of technological tools and the source of the frequency modulation detection is still far behind.
5.       Fifth generation (beginning in 1989)
Developed an optical amplifier repeater function which replaces the previous generations.
In the early development of transmission capacity is only achieved 400 Gb.km / s but a year later the transmission capacity has penetrated 50,000 Gb.km / s!
6.       Top-Six generation?
In 1988 Linn F. Mollenauer pioneered optical soliton communication systems. Soliton is a pulse wave that consists of many components of different wavelengths and also varies only slightly in intensity. Soliton length is only 10 -12 seconds and can be divided into several components that are close together, so that the signals in the form of solitons is information that consists of multiple channels at once (wavelength division multiplexing). We experimentally demonstrated that solitons can carry a minimum of 5 channels, each of which carries information at a rate of 5 Gb / s. Transmission capacity has been tested 35,000 Gb.km / s. The workings of this system is the effect of Kerr solitons, ie the rays will travel the same wavelength at different rates within a material when its intensity exceeds a limit price. This effect is then used to neutralize the effects of dispersion, so that the soliton does not widen at a time until the receiver. This is very advantageous because the resulting error rate is very small and even negligible.



Although the light propagates along the fiber core without the layer of leather material, but the skin has several functions:
- Reduce the loss of light from the core to the surrounding air.
- Reduce the scattering loss at the core surface.
- Protects the fiber from contamination of surface absorption.
- Increasing the mechanical strength.
If the difference in the refractive index of the core and made drastic skin called the optical fiber Step index (SI), the difference between skin and core refractive index is symbolized by Δ, where:


For additional protection, leather wrapped by an additional layer (made of certain types of plastic) which is a coat or a buffer to protect the optical fiber from physical damage.Buffer is elastic, prevent abrasion and prevent loss due to scattering microbends.

2.flow of Fiber Optic Light Inside

The concept of propagation of light in optical fibers, can be reviewed by two approaches / theories of geometric optics in which light rays are seen as fulfilling the laws of geometric light (reflection and refraction) and physical optics in which light is seen as an electro-magnetic waves (mode theory) . Overview of Geometric Optics  Gives a clear picture of the propagation of light along optical fibers. Two types of rays can propagate along optical fibers where the light rays propagate meridian cuts the optical fiber axis and the skew ray in which the rays do not propagate through the fiber optic axis. Meridian-ray beam can be classified into bound and unbound rays. Bound rays in optical fiber due to total reflection, in which order these events occur then the beam entering the fiber core must be cut border skin with a greater angle than the critical angle, the EC, so that light can propagate along the fiber.

Overview of physical optics
Approach as a ray of light just to explain how the direction of a plane wave propagating in a fiber but does not review other properties of plane waves of interference, in which the plane waves interfere with each other along the propagation, so that only the types of certain plane waves which can propagate along the fiber . It would require a review of physical optics is looking at light as an electromagnetic wave is called the theory of modes.
The theory used to explain the mode in addition to the types of plane waves which can propagate along the fiber, also for explaining the properties of optical fibers such as absorption, attenuation and dispersion.
Mode is a "configuration of light propagation in optical fibers that provide the transverse electric field distribution in a stable (unchanged throughout the propagation of light in the direction of the axis) so that light can be guided in the fiber optics" (Introduction To Optical Fiber Communication, Yasuharu Suematsu, Ken - Ichi Iga). Collection of electromagnetic waves guided in the optical fiber are called modes.
View mode theory of light as a plane wave which is expressed in the direction, amplitude and wavelength of perambatannya. Plane wave is a wave surface (which on the surface of this phase of his constant, called a wavefront) is an infinite flat plane perpendicular to the direction of propagation. Relationships wavelength, propagation speed and wave frequency in a medium.


Why is fiber optic system is said to revolutionize the world telekomunikiasi? is because compared with the conventional system using metal wires (copper) used, the optical fiber having:

Less expensive - Several miles of optical cable can be made cheaper than copper wires of equal length.

Thinner - Optical fibers can be made with smaller diameter (the size of the skin of the fiber diameter about 100 μm and total diameter coupled with a protective jacket around 1-2 mm) than copper wires, and also because the optical fiber carrying light (light) then it certainly has a light weight (reduced weight). So fiber-optic cables take a smaller place in the soil.

Higher carrying capacity - Because optical fibers are thinner than copper wires then most of the optical fiber can be bundled into a cable with a certain diameter of the multiple telephone lines may be on the same cable or more channels on cable TV can be through cable. Fiber optics also has a large bandwidth (1 and 100 GHz, for multimode and single-mode along the 1 km).

Less signal degradation - The signal loss in optical fibers is smaller (less than 1 dB / km at a wide range of wavelengths) as compared with copper wire.

Message Origin
Message origin can be a non-electric physical quantities (sound or picture), so that the necessary transducers (sensors) that alter message from form to form a non-electric power.
A common example is a microphone to change sound waves into electrical currents and video cameras (CCD) transforms the image into electrical current.

Modulator and Carrier Source
Have two main functions, the first electrically changing message into a form suitable, both laid it on the signal generated by carrier wave source.
Modulation formats can be differentiated into analog and digital modulation.
In digital modulation for laying the digital data signal on a carrier wave, the modulator simply just to on his or her right off the carrier signal source according to his data.
Carrier sourc membangkitkankan light waves, which are commonly used Laser Diode (LD) or Light Emitting Diode (LED).

Channel Coupler
To channel the power of light waves that have been modulated from the carrier source to the information channel (fiber optics).
Is an important part of the design of optical fiber communication systems because the possibility of loss is high.

Information Channel (Fibre Optics)
Desirable characteristics of optical fibers is attenuation and low-angle light-cone of acceptance.
Amplifier connections required at the very long (hundreds or thousands of kilometers) in order to have sufficient power to the receiver.
Repeaters can be used only for the digital system, which serves to change the weak optical signal into electrical form and then strengthened and restored to form an optical signal for subsequent transmission.
Time propagation of light in an optical fiber depends on the frequency of light and the path through which, the signal light propagating in optical fibers have the different frequencies within a certain range (the width of the frequency spectrum) and powernya divided over different paths, different, this causes a distortion in the signal.
In digital systems this distortion in the form of widening (dispersion) of digital pulses that propagate in the fiber optics, is increasingly widening with increasing distance traveled and the widening of this will overlap with other pulses, it will cause errors in signal detection. The existence of dispersion limit the speed of information (on speed digital information system called the data rate measured in bits per second (bps)) that can be delivered.
On the phenomenon of optical solitons, dispersion effect is balanced by nonlinear effects of optical fibers so that the pulse signal can propagate without changing shape (not dilated).

Detector and Amplifier
Used photo-detectors (photo-diode, photo transistor, etc.) that serves to change the received optical signals into electrical signals.

Signal Processor
For analog transmission, the signal processor consists of strengthening and signal filtering. Filtering aims to maximize the ratio of signal power to signal power that is not diinginakan. Random fluctuations that exist in the received signal is referred to as noise. How does this noise on the communication system is determined by the amount of SNR (Signal to Noise Ratio), the ratio of signal power to noise power, usually expressed in desi-Bell (dB), the greater the SNR the better the quality of the communication system to noise.
For digital systems, signal processor consists of strengthening and filtering the signal and sets of decision makers.
The series of these decision makers to decide whether a binary 0 or 1 is received during the time slot of each individual bit. Because of the noise that can not be eliminated then there is always the possibility of errors of this decision-making process, expressed in magnitude Bit Error Rate (BER) that its value should be small in communication.
If the data is transmitted is an analog (eg voice), but is transmitted digitally over fiber optics (the transmitter is required Analog to Digital Converter (ADC) before incoming signal modulator) is also required Digital to Analog Converter (DAC) to signal processor, to transform digital data into analog, prior to release to the output (eg speaker).


Message Output
If the resulting output are presented directly to the people, who hear or see such information, then the output is still in the form of electrical signals to be converted into sound waves or visual image. Transducer (actuator) for this are the speakers for the audio message and a cathode ray tube (CRT) (or others such as LCD, OLED, etc.) for the visual image.
In some situations such as in systems in which computers or other machines connected together via a fiber optic system, then the output in the form of electrical signals can directly be used. This is also when the optical fiber system is only part of a larger network, as in a fiber link between the telephone exchange or a fiber trunk line carrying a number of television programs, in this case includes the distribution of processing electrical signals to certain goals desired. Equipment at the ouput message is simple only in the form of an electrical connector to the signal processor the next system.

History of Fiber Optics Technology







In 1880 Alexander Graham Bell invented a light communications system called photo-phone using sunlight reflected from a voice-modulated thin mirror to bring the conversation. Photo-phone never achieved commercial success, although the system is working quite well. Here are some of the stages of historical development of optical fiber technology:



1.       First generation Instance (starting 1970)
System is still simple and the basis for the next generation system consists of:
Encoding: Changing input (eg voice) into electrical signals.Transmitter: Changing the electrical signals into modulated light wave, a LED with a wavelength of 0.87 μm. Silica Fibers: As an introduction to waves of light.Repeater: For a light wave amplifier which weakened on the road
Receiver: Change the modulated light waves into electrical signals, a photo-detector
Decoding: Changing the electrical signals into output (eg voice). Repeater works by converting light waves into electrical signals and then amplified electronically and converted back into light waves. In 1978 the transmission capacity can reach 10 Gb.km / s.

2.       Second generation (beginning in 1981)
To reduce the effect of dispersion, fiber core size minimized. The refractive index of the skin was made in close with the core refractive index. Using a laser diode, the emitted wavelength 1.3 μm. Transmission capacity to 100 Gb.km / s.

3.        Third generation (starting 1982)
Completion of the manufacture of silica fibers. Making a laser diode chip wavelength 1.55 μm.
Improved purity silica material so that transparency can be made for a wavelength of about 1.2 μm to 1.6 μm  Transmission capacity into several hundred Gb.km / s

4.        Fourth geneartion (starting 1984)
Commencement of research and development of a coherent system, rather than modulating the intensity modulation, but frequency modulation. In 1984 its capacity has been able to equal the capacity of a direct detection system (intensity modulation). Hampered its development because of technological tools and the source of the frequency modulation detection is still far behind.

5.       Fifth generation (beginning in 1989)
Developed an optical amplifier repeater function which replaces the previous generations.
In the early development of transmission capacity is only achieved 400 Gb.km / s but a year later the transmission capacity has penetrated 50,000 Gb.km / s!

6.       Top-Six generation?
In 1988 Linn F. Mollenauer pioneered optical soliton communication systems. Soliton is a pulse wave that consists of many components of different wavelengths and also varies only slightly in intensity. Soliton length is only 10 -12 seconds and can be divided into several components that are close together, so that the signals in the form of solitons is information that consists of multiple channels at once (wavelength division multiplexing). We experimentally demonstrated that solitons can carry a minimum of 5 channels, each of which carries information at a rate of 5 Gb / s. Transmission capacity has been tested 35,000 Gb.km / s. The workings of this system is the effect of Kerr solitons, ie the rays will travel the same wavelength at different rates within a material when its intensity exceeds a limit price. This effect is then used to neutralize the effects of dispersion, so that the soliton does not widen at a time until the receiver. This is very advantageous because the resulting error rate is very small and even negligible.



Although the light propagates along the fiber core without the layer of leather material, but the skin has several functions:
- Reduce the loss of light from the core to the surrounding air.
- Reduce the scattering loss at the core surface.
- Protects the fiber from contamination of surface absorption.
- Increasing the mechanical strength.
If the difference in the refractive index of the core and made drastic skin called the optical fiber Step index (SI), the difference between skin and core refractive index is symbolized by Δ, where:


For additional protection, leather wrapped by an additional layer (made of certain types of plastic) which is a coat or a buffer to protect the optical fiber from physical damage.Buffer is elastic, prevent abrasion and prevent loss due to scattering microbends.

2.flow of Fiber Optic Light Inside

The concept of propagation of light in optical fibers, can be reviewed by two approaches / theories of geometric optics in which light rays are seen as fulfilling the laws of geometric light (reflection and refraction) and physical optics in which light is seen as an electro-magnetic waves (mode theory) . Overview of Geometric Optics  Gives a clear picture of the propagation of light along optical fibers. Two types of rays can propagate along optical fibers where the light rays propagate meridian cuts the optical fiber axis and the skew ray in which the rays do not propagate through the fiber optic axis. Meridian-ray beam can be classified into bound and unbound rays. Bound rays in optical fiber due to total reflection, in which order these events occur then the beam entering the fiber core must be cut border skin with a greater angle than the critical angle, the EC, so that light can propagate along the fiber.


Overview of physical optics Approach as a ray of light just to explain how the direction of a plane wave propagating in a fiber but does not review other properties of plane waves of interference, in which the plane waves interfere with each other along the propagation, so that only the types of certain plane waves which can propagate along the fiber . It would require a review of physical optics is looking at light as an electromagnetic wave is called the theory of modes. The theory used to explain the mode in addition to the types of plane waves which can propagate along the fiber, also for explaining the properties of optical fibers such as absorption, attenuation and dispersion. Mode is a "configuration of light propagation in optical fibers that provide the transverse electric field distribution in a stable (unchanged throughout the propagation of light in the direction of the axis) so that light can be guided in the fiber optics" (Introduction To Optical Fiber Communication, Yasuharu Suematsu, Ken - Ichi Iga). Collection of electromagnetic waves guided in the optical fiber are called modes. View mode theory of light as a plane wave which is expressed in the direction, amplitude and wavelength of perambatannya. Plane wave is a wave surface (which on the surface of this phase of his constant, called a wavefront) is an infinite flat plane perpendicular to the direction of propagation. Relationships wavelength, propagation speed and wave frequency in a medium. Why is fiber optic system is said to revolutionize the world telekomunikiasi? is because compared with the conventional system using metal wires (copper) used, the optical fiber having: Less expensive - Several miles of optical cable can be made cheaper than copper wires of equal length. Thinner - Optical fibers can be made with smaller diameter (the size of the skin of the fiber diameter about 100 μm and total diameter coupled with a protective jacket around 1-2 mm) than copper wires, and also because the optical fiber carrying light (light) then it certainly has a light weight (reduced weight). So fiber-optic cables take a smaller place in the soil. Higher carrying capacity - Because optical fibers are thinner than copper wires then most of the optical fiber can be bundled into a cable with a certain diameter of the multiple telephone lines may be on the same cable or more channels on cable TV can be through cable. Fiber optics also has a large bandwidth (1 and 100 GHz, for multimode and single-mode along the 1 km). Less signal degradation - The signal loss in optical fibers is smaller (less than 1 dB / km at a wide range of wavelengths) as compared with copper wire.Message Origin Message origin can be a non-electric physical quantities (sound or picture), so that the necessary transducers (sensors) that alter message from form to form a non-electric power. A common example is a microphone to change sound waves into electrical currents and video cameras (CCD) transforms the image into electrical current.Modulator and Carrier Source Have two main functions, the first electrically changing message into a form suitable, both laid it on the signal generated by carrier wave source. Modulation formats can be differentiated into analog and digital modulation. In digital modulation for laying the digital data signal on a carrier wave, the modulator simply just to on his or her right off the carrier signal source according to his data. Carrier sourc membangkitkankan light waves, which are commonly used Laser Diode (LD) or Light Emitting Diode (LED).Channel Coupler To channel the power of light waves that have been modulated from the carrier source to the information channel (fiber optics). Is an important part of the design of optical fiber communication systems because the possibility of loss is high.Information Channel (Fibre Optics) Desirable characteristics of optical fibers is attenuation and low-angle light-cone of acceptance. Amplifier connections required at the very long (hundreds or thousands of kilometers) in order to have sufficient power to the receiver. Repeaters can be used only for the digital system, which serves to change the weak optical signal into electrical form and then strengthened and restored to form an optical signal for subsequent transmission. Time propagation of light in an optical fiber depends on the frequency of light and the path through which, the signal light propagating in optical fibers have the different frequencies within a certain range (the width of the frequency spectrum) and powernya divided over different paths, different, this causes a distortion in the signal. In digital systems this distortion in the form of widening (dispersion) of digital pulses that propagate in the fiber optics, is increasingly widening with increasing distance traveled and the widening of this will overlap with other pulses, it will cause errors in signal detection. The existence of dispersion limit the speed of information (on speed digital information system called the data rate measured in bits per second (bps)) that can be delivered. On the phenomenon of optical solitons, dispersion effect is balanced by nonlinear effects of optical fibers so that the pulse signal can propagate without changing shape (not dilated).Detector and Amplifier Used photo-detectors (photo-diode, photo transistor, etc.) that serves to change the received optical signals into electrical signals.Signal Processor For analog transmission, the signal processor consists of strengthening and signal filtering. Filtering aims to maximize the ratio of signal power to signal power that is not diinginakan. Random fluctuations that exist in the received signal is referred to as noise. How does this noise on the communication system is determined by the amount of SNR (Signal to Noise Ratio), the ratio of signal power to noise power, usually expressed in desi-Bell (dB), the greater the SNR the better the quality of the communication system to noise. For digital systems, signal processor consists of strengthening and filtering the signal and sets of decision makers. The series of these decision makers to decide whether a binary 0 or 1 is received during the time slot of each individual bit. Because of the noise that can not be eliminated then there is always the possibility of errors of this decision-making process, expressed in magnitude Bit Error Rate (BER) that its value should be small in communication. If the data is transmitted is an analog (eg voice), but is transmitted digitally over fiber optics (the transmitter is required Analog to Digital Converter (ADC) before incoming signal modulator) is also required Digital to Analog Converter (DAC) to signal processor, to transform digital data into analog, prior to release to the output (eg speaker).Message Output If the resulting output are presented directly to the people, who hear or see such information, then the output is still in the form of electrical signals to be converted into sound waves or visual image. Transducer (actuator) for this are the speakers for the audio message and a cathode ray tube (CRT) (or others such as LCD, OLED, etc.) for the visual image. In some situations such as in systems in which computers or other machines connected together via a fiber optic system, then the output in the form of electrical signals can directly be used. This is also when the optical fiber system is only part of a larger network, as in a fiber link between the telephone exchange or a fiber trunk line carrying a number of television programs, in this case includes the distribution of processing electrical signals to certain goals desired. Equipment at the ouput message is simple only in the form of an electrical connector to the signal processor the next system.

Tuesday, January 11, 2011

Panja Mafia Pemilu makin Mengarah ke Andi Nurpati


Headline News / Polkam / Selasa, 12 Juli 2011 22:30 WIB

Metrotvnews.com, Jakarta: Rapat kerja Panitia Kerja DPR tentang Mafia Pemilu dengan Badan Pengawas Pemilu (Bawaslu) dan Komisi Pemilihan Umum (KPU), Selasa (12/7) malam, berakhir. Temuan hasil rapat semakin mengerucutkan pada nama Andi Nurpati sebagai orang yang paling berperan dalam pemalsuan surat keputusan Mahkamah Konstitusi. Surat palsu keputusan MK itu menetapkan Dewi Yasin Limpo sebagai pemenang pemilihan anggota legislatif dari daerah pemilihan (Dapil) I Sulawesi Selatan.

Reporter Metro TV Rori Asyarie, di Gedung DPR/MPR, melaporkan, temuan dalam rapat seharian yang mengerucut pada nama Andi Nurpati adalah soal rapat pleno KPU tanggal 21 Agustus 2009. Saat itu, menurut staf KPU Syahrudin, Andi Nurpati lah yang membacakan surat keputusan MK yang belakangan diketahui palsu itu.

Menurut Syahrudin yang juga diperkuat Kepala Biro Teknis KPU, surat MK palsu tertanggal 14 Agustus 2009, itu tidak ditunjukkan dan tidak dikonsultasikan terlebih dulu ke komisioner KPU yang lain. Surat MK palsu itu kemudian tersimpan di Biro Hukum KPU hingga rapat pleno lanjutan pada 2 September 2000.

Ketidaktahuan komisioner KPU lain soal surat yang dibacakan Andi itulah yang dipertanyakan anggota Panja Mafia Pemilu. Diduga kuat surat itu sengaja disimpan oleh Biro Hukum KPU atas perintah Andi.

Temuan lainnya dalam rapat kerja Panja Mafia Hukum hari ini adalah soal rapat konsolidasi sebelum rapat pleno KPU tanggal 21 Agustus 2009. Dalam rapat konsolidasi yang tak disebutkan tanggalnya tersebut, Andi Nurpati memutuskan adanya penambahan suara untuk calon legislatif Partai Hanura dari Dapil I Sulsel, yakni Dewi Yasin Limpo.

Atas temuan baru itu, Wakil Ketua Panja Ganjar Pranowo berani menyimpulkan bahwa Panja berkeyakinan soal keterlibatan Andi Nurpati dalam pemalsuan surat MK itu. Yang lebih meyakinkan Panja, menurut Ganjar, Panja baru mengetahui bahwa surat itu baru diserahkan Andi Nurpati, beberapa hari, sebelum Andi menyatakan mundur dari KPU. Artinya itu tahun ini, 2011.

"Maka kita semakin meyakinkan saja, dalam seluruh rapat-rapat ini, kita semakin mengerucut, bahwa Bu Andi selalu menjadi tokoh sentral dalam seluruh pembuatan keputusan politik di KPU ini," jelas Ganjar.(DSY)


Saturday, January 1, 2011

Bismillah :sedikit celotehan:

tahun 2011 telah memasuki, usiaku sudah tidak tua lagi...
akhir semester hampir tiba didepan mata, tugas kuliah menumpuk sebanyak hardisk saya yang low space...
malam ini saya chat dengan dosen saya yang sedang kuliah S3 di italia, terus terang saya ingin banget kesana, ingin banget menuntut ilmu di negeri orang lain. ingin rasanya meraih beasiswa dan menjadi pemenang di dunia internasional.
namun apa daya, saat ini saya bingung dengan kemampuan saya yang pas-pasanini. ngoding setengah2, manajemen males mbaca, itung2an lancar klo lagi mud.
saya hanya bisa berusaha, berdoa dan menunggu hasil semoga hasil semester ini baik dan lulus tepat waktu abis tu kuliah di luar negeri.. amin...
sedikit tips dari dosen sya..
bljr yg rajin.. Tau cara, tujuan, dan alasan mempelajari sesuatu
Sm pertajam wawasan.. Insyallah bs
tau gmn caranya solve problem sm aplikasinya

amin...

Sunday, October 3, 2010

MULAI BEKERJA DENGAN UNIX

Bab ini akan menjelaskan tentang bagaimana bekerja
dengan menggunakan UNIX. Disamping itu juga akan dijelaskan
mengenai beberapa konsep dasar UNIX yang perlu diketahui.
Pembahasan akan mencakup:

- konsep rekening pemakai
- memulai, menggunakan dan mengakhiri UNIX
- password dan masalah keamanannya
- format umum perintah UNIX
- karakter dan tombol khusus
- pertolongan tentang perintah


2.1 PEMAKAI DALAM SISTEM UNIX

Setiap pemakai yang akan menggunakan sistem UNIX harus
memiliki sebuah rekening pemakai di dalam sistem. Rekening
ini akan digunakan untuk mengidentifikasikan pemakai di
dalam sistem. Pemakai yang dikenal oleh sistem akan
diperbolehkan masuk dan melakukan operasi-operasi yang
diijinkan, sedangkan yang tidak dikenal oleh sistem akan
ditolak masuk.
Rekening pemakai yang digunakan UNIX terdiri dari 7
field dimana pembatas antar field tersebut yaitu ':'.
Ketujuh field tersebut adalah :

a. Nama pemakai atau user name
Semua pemakai UNIX akan diberikan nama pemakai atau
user name dimana nama pemakai ini akan digunakan
untuk mengidentifikasi pemakai yang akan masuk ke
dalam sistem. Di dalam sistem, nama pemakai antar
pemakai sebaiknya unik atau tidak boleh ada yang
sama. Jika tidak maka akan menimbulkan beberapa hal-
hal yang tidak diinginkan kemudian, misalnya surat
elektronik yang akan salah alamat.

b. Password
Ketika kita akan masuk ke dalam sistem, UNIX akan
selalu menanyakan password kita. Password dapat
dimisalkan sebagai kunci untuk memasuki lingkungan
kerja pemakai. Tanpa kunci tersebut, kita tidak
dapat masuk ke dalam sistem dan lingkungan kerja
milik kita sendiri.

c. Nomor id pemakai
Disamping nama pemakai, seorang pemakai juga
memiliki nomor id pemakai. Berbeda dengan nama
pemakai, nomor id pemakai haruslah unik. Nomor ini
digunakan oleh sistem untuk mengidentifikasikan
pemakai pada beberapa operasi di dalam sistem.

d. Nomor id group
Beberapa pemakai dapat disatukan dalam satu group.
Group tersebut memiliki nama group dan nomor id
group dimana informasi lengkap tentang group itu
sendiri tersimpan pada file /etc/group. Pada
rekening pemakai cukup dicantumkan nomor id group
saja.

e. Informasi rekening pemakai
Informasi rekening pemakai digunakan untuk
menjelaskan tentang pemilik rekening tersebut.

f. Home direktory
Home directory adalah direktori yang pertama kali
kita kunjungi dan tinggali ketika masuk ke dalam
sistem. Pada umumnya direktori ini merupakan
direktori standar dimana kita dapat bekerja.

g. Program yang pertama kali dieksekusi
Ketika pemakai masuk ke dalam sistem, secara
otomatis UNIX akan langsung mengeksekusi perintah
yang tercantum pada kolom ini. Pada umumnya perintah
yang pertama kali dieksekusi adalah shell.
Selanjutnya shell akan menerjemahkan perintah-
perintah lainnya yang kita masukkan ke dalam sistem.

Perhatikan contoh rekening pemakai milik tati dibawah
ini:


tati:Zzwd8ofgcPVIw:189:S1_87:staf:/usr/tati:/bin/sh
| | | | | | |
| | | | | | |
+---------|-------|-----|----|-------|------|-> nama pemakai
+-------|-----|----|-------|------|-> password
+-----|----|-------|------|-> no id pemakai
+----|-------|------|-> no id group
+-------|------|-> informasi pemakai
+------|-> direktori tinggal
+-> program pertama

Gambar 2.1 rekening pemakai


Perhatikan bahwa pada kolom password terdapat
kata Zzwd8ofgcPVIw dimana kata tersebut merupakan password
dari pemakai. Namun apakah itu merupakan password
sesungguhnya ? Bukan ! Password sesungguhnya telah
dikonversi atau di-encrypt. Jadi yang terlihat pada file
rekening tersebut merupakan konversi dari password aslinya.
Password asli tidak dapat diketahui oleh siapapun.
Pada rekening pemakai tati juga terlihat bahwa program
yang pertama kali dieksekusi ketika pemakai masuk ke dalam
sistem UNIX adalah program /bin/sh yaitu program shell.
Seluruh rekening milik pemakai di dalam sistem UNIX
disimpan di dalam sebuah file yang diberi nama /etc/passwd.
Contoh isi sebuah file rekening pemakai adalah sebagai
berikut:

$ cat /etc/passwd
root:hxI/hs24w48Qg:0:0:Super user:/:/bin/csh
sysadm::0:0:System Administration:/usr/sysadm:/bin/sh
shut::0:0:Shutdown Otomatis:/usr/shut:/bin/sh
cron:NOLOGIN:1:1:Cron daemon for periodic tasks:/:
bin::3:3:System file administration:/:
uucp::4:4:Uucp :/usr/spool/uucppublic:/usr/lib/uucp/uucico
asg:NOLOGIN:6:6:Assignable device administration:/:
sysinfo:NOLOGIN:10:10:Access to system information:/:
network:NOLOGIN:12:12:Mail and Network :/usr/spool/micnet:
lp:NOLOGIN:14:3:Print spooler administration:/usr/spool/lp:
dos:NOLOGIN:16:10:Access to Dos devices:/:
chaerind:9zws8okDcPVIw:190:1087:geo:/tmp:/bin/sh
denny:Zzw.8ofgcPVIw:3710:1087:denny yerianto:/usr/mhs/denny:/bin/sh
ucrit:dsfinUcnsf2ck:3711:1087:ucrit :/usr/mhs/ucrit:/bin/csh
jecky:Kawhju.ZQ4GOk:3713:51::/usr/jecky:/bin/ksh
heru::3714:51::/usr/heru:/bin/sh
$

Pada sistem UNIX dikenal dua jenis pemakai yaitu:

a. Pemakai biasa
Pemakai biasa adalah pemakai yang diberi ijin untuk
menggunakan sistem dan beberapa fasilitas lain dalam
UNIX dengan batas-batas perijinan tertentu. Dengan
demikian pemakai biasa tidak dapat secara bebas
keluar masuk direktori lain atau tidak dapat secara
bebas menggunakan file-file di dalam sistem. Ingat,
pemakai biasa hanya boleh menggunakan direktori atau
file yang telah dijinkan saja.

b. Super user
Super user adalah pemakai yang memiliki hak
istimewa di dalam sistem UNIX karena memiliki
kemampuan yang tidak dibatasi oleh perijinan yang
diterapkan pada sistem. Super user dapat keluar
masuk direktori atau menggunakan file secara bebas.
Pada umumnya super user dimiliki oleh administrator
sistem. Administrator sistem adalah pemakai yang
bertanggung jawab untuk mengelola sistem. Nama
pemakai dari rekening super user , di dalam
/etc/passwd biasanya bernama root dengan nomor id
pemakai 0.


2.2 MEMULAI, MENGGUNAKAN DAN MENGAKHIRI UNIX

Jika kita baru pertama kali menggunakan UNIX, langkah
pertama yang dilakukan adalah meminta rekening pemakai
kepada administrator sistem. Jika administrator sistem
menyetujui, maka ia akan membuatkan rekening pemakai baru
bagi kita serta menyediakan home direktori sebagai direktori
tempat kita bekerja.
Jangan lupa pula menanyakan nama pemakai bagi rekening
kita, sebab nama tersebut tidak selalu sesuai dengan nama
kita yang sesungguhnya. Pada umumnya nama pemakai pada
rekening pemakai adalah 8 karakter.
Perlu ditanyakan pula apakah password sudah diberikan
ke dalam rekening tersebut.
Setelah langkah-langkah di atas telah dilakukan, maka
kita siap menggunakan terminal UNIX. Layar terminal kita
terlihat sebagai berikut:

login:

Untuk masuk ke dalam sistem UNIX kita harus melalui
proses login, yang akan memeriksa apakah kita diijinkan
masuk ke dalam sistem. Proses pemeriksaan dilakukan oleh
sistem dengan cara memeriksa nama pemakai dan password yang
kita masukkan ke dalam sistem. Berikut ini akan dicontohkan
cara memasukkan nama pemakai dan password ke dalam sistem,
dimana nama pemakai adalah denny dan passwordnya adalah
yerianto.


login: denny (masukkan nama pemakai)
password: yerianto (yerianto tak tampak dilayar)

Welcome to UNIX System V
for personal computers

Brought to you by
The Santa Cruz Operation

$ (prompt tanda shell siap)


Pengetikan password tidak akan ditampakkan pada layar.
Hal ini bertujuan untuk merahasiakan password yang diketik.
Tanda prompt menandakan jenis shell yang digunakan.
Tanda prompt $ adalah menandakan jenis shell Bourne shell
atau Korn shell. Sedangkan tanda prompt % menandakan jenis
shell C shell.
Kini kita telah berada di dalam sistem UNIX. Tepatnya
di dalam home directory yang telah ditentukan sesuai dengan
yang tercantum pada rekening pemakai. Kita dapat menjalankan
perintah-perintah UNIX yang diijinkan bagi kita.
Marilah kita coba beberapa perintah UNIX. Perintah
pertama yang akan kita coba adalah perintah untuk
menampilkan karakter ke layar terminal. Perintah yang
digunakan adalah perintah echo yang diikuti dengan argumen
berupa karakter yang akan ditampilkan ke layar terminal.
Perhatikan contoh berikut ini:

$ echo selamat datang di dunia UNIX
selamat datang di dunia UNIX
$

Kita juga dapat menampilkan siapa saja pemakai yang
sedang aktif di dalam sistem UNIX sekarang dengan
menggunakan perintah who sebagai berikut:

$ who
heru tty05 Oct 23 07:30
root tty01 Oct 23 07:28
denny tty02 Oct 23 07:28
ucrit tty03 Oct 23 07:29
chaerind tty04 Oct 23 07:30
kamin tty06 Oct 23 10:29
suibam tty07 Oct 23 11:01
unyil tty08 Oct 23 11:29
satria tty09 Oct 23 11:30
$

Atau kita juga dapat melihat tanggal dan waktu sekarang
dengan menggunakan perintah date.

$ date
Fri Oct 23 07:28:32 PDT 1992
$

Untuk masuk ke dalam sistem UNIX, kita harus melalui
suatu proses yang disebut dengan proses login seperti
telah diuraikan pada awal sub bab ini. Untuk keluar dari
sistem, kita juga harus melakukan suatu proses yang disebut
dengan proses logout. Ada tiga cara untuk keluar dari sistem
UNIX yaitu:

$ exit
login:

atau

$ ^D (tekan kontrol dan D)
login:

atau

$ logout
login:


Ingat, setiap sebelum meninggalkan terminal, kita harus
melakukan proses logout. Jika tidak maka pemakai lain dapat
menggunakan rekening pemakai milik kita. Pemakai tersebut
dapat bertindak apa saja dengan mengatasnamakan rekening
pemakai kita.


2.3 PASSWORD DAN MASALAH KEAMANANNYA

Terkadang administrator sistem membuatkan rekening
pemakai baru tanpa memberikan password. Akibatnya setelah
kita mengisikan nama pemakai, maka pengisian password tidak
dilakukan dan langsung masuk ke dalam sistem UNIX. Hal ini
dapat dimisalkan sebagai rumah yang tidak terkunci pintunya.
Keadaan ini akan sangat berbahaya bagi kita, karena pemakai
lain dapat masuk dan menggunakan rekening kita. Oleh karena
itu maka sebaiknya rekening tersebut harus segera diberi
password.
Perintah yang digunakan untuk membuat atau mengganti
password adalah perintah passwd. Jika sebelumnya kita tidak
memiliki password, maka cara yang digunakan untuk membuat
password baru adalah sebagai berikut:

$ passwd
Changing password for denny
New password: yerianto (tak tak tampak pada layar)
Re-enter new password: yerianto
$

Jika sebelumnya kita sudah memiliki password, maka cara
yang dapat digunakan untuk mengganti password lama adalah
sebagai berikut:

$ passwd
Changing password for denny
Old password : yerianto
New password : gontaganti
Re-enter new password : gontaganti (konfirmasi)
$

Sebelum kita mengganti password lama, maka kita
diwajibkan untuk memasukkan password lama. Hal ini untuk
memastikan bahwa kita memang berhak mengganti password dari
rekening pemakai tersebut. Perhatikan contoh berikut dimana
pemakai yang akan mengganti password lama tidak diijinkan
mengganti dengan password baru dikarenakan tidak mengetahui
password lamanya.

$ passwd
Changing password for denny
Old password : gantiganti (seharusnya gontaganti !)
sorry.
$

Pada bagian akhir proses penggantian password dilakukan
konfirmasi untuk memastikan tidak ada kesalahan isian
password baru. Jika terjadi kesalahan pada konfirmasi maka
perubahan dibatalkan dan diulang kembali. Jika kesalahan
lebih dari tiga kali maka proses penggantian akan
dibatalkan. Perhatikan contoh berikut ini :


$ passwd
Changing password for denny
Old password : gontaganti
New password : yerianto
Re-enter new password : gontaganti (yerianto ?)
They don't match; try again.
Re-enter new password: gantiganti (yerianto ?)
They don't match; try again.
Re-enter new password: jerianto (yerianto ?)
Too many tries; try again later.
$

Pada umumnya panjang minimal karakter yang digunakan
untuk password adalah lima karakter (beberapa UNIX ada yang
mensyaratkan 8 karakter). Jika jumlah karakter password
kurang dari yang ditentukan maka proses penggantian akan
dibatalkan.

$ passwd
Changing password for denny
Old password : gontaganti
New password : chae (minimal 5 karakter)
Too short. Password unchanged.
$

Hal yang penting untuk diperhatikan dalam memelihara
password, yaitu kemungkinan pembongkaran password milik kita
oleh orang lain yang tidak berhak. Banyak cara yang telah
dilakukan oleh para hacker untuk membongkar password
sesorang. Tujuan mereka beraneka ragam, dari sekedar mencari
kepuasan terhadap keberhasilan membongkar hingga upaya yang
disengaja untuk mengacaukan sistem kita.
Berikut ini akan diberikan panduan praktis untuk
melindungi password kita agar tidak mudah dibongkar orang
lain.

a. Password harus mudah diingat oleh kita sendiri
tetapi tidak mudah diingat oleh orang lain.

b. Jangan menggunakan bagian dari nama lengkap, nama
panggilan, nama kekasih, tanggal lahir, inisial,
dan hal lain yang berhubungan dengan diri kita. Atau
jangan pula menggunakan nama tempat, nama gedung,
atau kata-kata yang lazim ada di kamus bahasa .
contoh:

- denny (nama pemakai sendiri)
- yerianto (nama akhir)
- 20011969 (tanggal lahir)
- 7270165 (nomor telepon)
- elexmedia (nama instansi)
- jembatan (kata yang lazim)

Jika masih tetap menginginkan kata-kata tersebut,
seharusnya kata-kata tersebut diacak terlebih
dahulu, misalnya dengan cara membalik urutan huruf
sehingga sepintas lalu agak sulit diterka.

- ynned (nama pemakai sendiri, denny)
- 96911002 (tanggal lahir, 20011969)
- 5610727 (nomor telepon, 7270165)
- aidemxele (nama instansi elexmedia)

Terkadang kata-kata 'plesetan' dapat lebih
menyulitkan pembongkaran password.
Contoh:

- bon7ovi (bon jovi, penyanyi rock)
- rock 4U (rock for you)
- man7des (mantu judes)

c. Jika mengalami kesulitan dalam menghafal password,
jangan melakukan pencatatan pada buku, papan tulis
atau tempat lain. Hal ini akan memudahkan orang lain
untuk melihat dan kemudian membongkarnya. Tempat
yang paling aman adalah di dalam otak kita.

d. Gunakan lebih dari enam karakter dan sebaiknya
mencakup karakter-karakter non alfabet.
Contoh:

- s_AR2_c3
- dg71m33ex
- ada blank !
- 7d2u5u9r=
- 1/3disayu

Sebenarnya, password yang paling ideal adalah
gabungan alfabet dan non alfabet karakter dengan
rangkaian yang tak bermakna. Namun sayangnya hal itu
sangat sulit untuk dihafalkan.
Cara berikut ini akan menghasilkan rangkaian
karakter password yang mudah dihafal oleh kita
tetapi cukup sulit dihafal oleh orang lain. Caranya
adalah dengan mengambil karakter awal suatu kalimat
panjang yang mudah diingat. Gabungan karakter awal
tersebut akan membentuk rangkaian karakter password.
Selanjutnya yang perlu kita hafalkan adalah
kalimatnya, bukan rangkaian karakter passwordnya.
Kalimat tersebut bisa sebagai peribahasa, awal lagu
dan lain-lain. Perhatikan contoh berikut ini:

o bka5rrw balon ku ada 5 rupa rupa warnanya
o tagytr tak ada gading yang tak retak
o dksnkk dut keredut si nini kapi kadut
o jlpmrsgh jhon lenon paul mccartney ringo
star george harrison

Perhatian, jika kita lupa password rekening pemakainya,
maka tak ada mekanisme apa pun yang dapat menemukan kembali
password yang terlupakan tersebut.


2.4 FORMAT UMUM PERINTAH UNIX

Shell bertanggung jawab untuk mengeksekusi seluruh
program yang kita panggil dari terminal. Setiap kita
memasukkan sebaris kata-kata dan diakhiri dengan enter ke
dalam shell, shell akan menganalisa kata-kata tersebut dan
menentukan apa yang harus dikerjakan. Format umum yang
diterima oleh shell adalah sebagai berikut:

nama-program argumen-argumen

Baris kata-kata yang diketik ke dalam shell ini disebut
perintah baris. Shell akan memeriksa perintah baris ini dan
menentukan nama program yang dieksekusi dan argumen-argumen
yang dilewatkan kepadanya.
Shell menggunakan karakter khusus untuk menentukan
dimana nama program dimulai dan diakhiri dan dimana nama
masing-masing argumen dimulai dan diakhiri pula. Karakter
yang digunakan untuk menandakan hal tersebut adalah karakter
whitespace yaitu berupa karakter spasi (space), karakter tab
dan karakter newline. Pemunculan karakter tersebut lebih
dari satu kali akan diabaikan oleh shell.

cp file1 file2

Shell akan memeriksa perintah baris tersebut dan
mengambil karakter dari awal baris hingga ditemukan karakter
whitespace sebagai nama program, yaitu cp. Kumpulan karakter
sesudah karakter whitespace tersebut hingga ditemukan
kembali karakter whitespace adalah sebagai argumen pertama,
yaitu file1. Selanjutnya mulai dari sesudah karakter
whitespace kedua hingga ditemukan karakter whitespace
selanjutnya adalah argumen ke dua, yaitu file2. Setelah
analisa perintah baris ini, shell mengetahui bahwa yang akan
dieksekusi adalah perintah cp dengan argumen-argumen ke satu
adalah file1 dan argumen ke dua adalah file2. Hal ini dapat
digambarkan sebagai berikut:


+----------+
+---------+ argumen | file1 |
| cp |<- - - - - - - - - +----------+ +---------+ | file2 | +----------+ Gambar 2.2 Eksekusi perintah cp dengan 2 argumen Pada sistem UNIX terdapat ratusan perintah yang dapat dimanfaatkan untuk mengelola sistem. Perintah-perintah tersebut pada umumnya memiliki argumen. Argumen-argumen memiliki bentuk berupa: a. Pilihan (option) Pada umumnya pilihan di awali oleh tanda pilihan, misalnya tanda minus '-'. Beberapa perintah mengijinkan penggabungan pilihan sekaligus dalam sebuah tanda pilihan. Disamping tanda pilihan minus, sering juga digunakan tanda pilihan plus '+' atau bahkan tanpa tanda pilihan. Pilihan dapat memiliki argumen b. Ekspresi Ekspresi merupakan kumpulan aturan yang mengatur masukan untuk perintah (akan dijelaskan pada bab lain) c. Namafile Namafile adalah nama dari file yang akan dimanipulasi. Pada umumnya file yang akan dimanipulasi oleh perintah dapat lebih dari satu. Secara umum derajat dari argumen-argumen tersebut pada sebuah perintah UNIX adalah: Perintah pilihan ekspresi namafile Pemanfaatan pilihan, ekspresi dan nama file bagi suatu perintah sesuai dengan kebutuhannya. Artinya kita dapat menggunakan sebagian atau seluruhnya atau tidak menggunakan sama sekali sesuai dengan format yang disediakan. Perhatikan contoh-contoh berikut ini (arti dari perintah-perintah berikut akan dijelaskan kemudian): $ rm file1 file2 file3 | | | | | +---------------> namafile
| +--------------------> namafile
+--------------------------> namafile


$ ls -alR
|
+--------------------------> gabungan pilihan


$ grep -v "pasal[1-12]" file1
| | |
| | +------> namafile
| +----------------> ekspresi
+--------------------------> pilihan

Gambar 2.3 perintah rm, ls dan grep


Untuk melakukan pemanggilan lebih dari satu perintah
dalam satu baris, dapat kita gunakan tanda semicolon ';'
sebagai pemisah antar perintah.

$ date ; who; echo selamat datang di UNIX
Fri Oct 23 07:28:32 PDT 1992
root tty01 Oct 23 07:28
denny tty02 Oct 23 07:28
ucrit tty03 Oct 23 07:29
chaerind tty04 Oct 23 07:30
kamin tty06 Oct 23 07:30
suibam tty07 Oct 23 07:30
unyil tty09 Oct 23 07:30
selamat datang di UNIX
$


2.5 KARAKTER DAN TOMBOL KHUSUS UNIX

Shell akan memberi arti khusus pada beberapa karakter.
Karakter-karakter ini memiliki fungsi khusus, sehingga
pemunculannya akan diartikan khusus pula oleh shell. Berikut
ini adalah tabel dari karakter khusus dan fungsinya.

-------------------------------------------------------
Karakter Fungsi
-------------------------------------------------------
"..." Mencegah tindakan karakter khusus dalam
untaian karakter yang disertakan, tetapi
memperbolehkan karakter khusus untuk ekspansi
variabel dan perintah bekerja.
$ Menyebabkan substitusi variabel shell
& proses latar belakang
'...' Mencegah karakter khusus yang ada dalam
untaian karakter yang disertakan
() Memberi daftar perintah untuk dikerjakan
sebagai proses terpisah
* karakter yang dapat mencocokkan dengan
untaian karakter apa saja
- menunjukkan tanda pilihan dari perintah yang
menyertainya
/ memisahkan bagian dari nama jalurnya
direktorinya
: memisahkan harga untaian karakterpada saat
membuat sebuah variabel shellmenjadi lebih
dari satu untaian karakter
; memisahkan beberapa perintah dalam satu baris
;; delimiter pada perintah case
< masukan standar > keluaran standar
? karakter yang dapat mencocokkan dengan
karakter tunggal apa saja
[...] mengelompokkan karakter untuk pencocokkan
\ mencegah karakter khusus yang mengikutinya
{} mengelompokkan daftar perintah
| membentuk pipa antar perintah
-------------------------------------------------------

Tabel 2.1 Karakter khusus


Disamping karakter khusus, terdapat pula beberapa
tombol yang memiliki makna tertentu. Berikut ini adalah tabel
dari tombol khusus dan fungsinya:


-------------------------------------------------------
Singkatan Arti Tombol
-------------------------------------------------------
intr gagalkan operasi Del (Delete)
quit gagalkan dengan core dump ^\ (Ctrl-\)
erase hapus dengan backspace ^H (Backspace)
kill hapus baris ^U (Ctrl-U)
eof bangkitkan end-of-file ^D (Ctrl-D)
eol pilihan end-of-line ^@ (NULL)
swtch job-control switch ^@ (NULL)
-------------------------------------------------------

Tabel 2.2 Tombol khusus


Tombol-tombol tersebut dapat kita definisi ulang dengan
menggunakan perintah stty. Misalnya UNIX pada komputer yang
kita gunakan menggunakan tombol del untuk melakukan erase dan
kontrol-C untuk intr, maka kita dapat mengubah lingkungan
kita seperti terlihat pada tabel di atas dengan cara sebagai
berikut:

$ stty intr "^?" erase "^H"
$

Untuk melihat tombol yang telah terdefinisi di dalam
lingkungan kita, dapat digunakan cara sebagai berikut:

$ stty -a
speed 9600 baud; line = 0; intr = DEL; quit = ^\; erase = ^H;
kill = ^U; eof = ^D; eol = ^@; swtch = ^@ -parenb -parodd cs8
-cstopb hupcl cread -clocal -loblk -ctsflow -rtsflow -ignbrk
brkint ignpar -parmrk -inpck -istrip -inlcr -igncr icrnl -iuclc
ixon ixany -ixoff isig icanon -xcase echo echoe echok -echonl
-noflsh opost -olcuc onlcr -ocrnl -onocr -onlret -ofill -ofdel
cr0 nl0 tab3 bs0 vt0 ff0
$


2.6 PERTOLONGAN TENTANG PERINTAH

Jika kita mengalami kesulitan dalam mengoperasikan
UNIX, ada sumber daya informasi yang dapat kita gunakan
yaitu buku manual UNIX. Di dalam buku tersebut terdapat
penjelasan yang rinci tentang berbagai hal termasuk
pertolongan tentang perintah-perintah yang kita kurang
mengerti.
Beberapa UNIX menyediakan fasilitas pertolongan
langsung di dalam sistem terhadap perintah yang tidak kita
kenal, yaitu menggunakan perintah man dengan diikuti nama
perintah yang ingin diketahui.

man perintah

Setelah pemanggilan perintah tersebut di atas, maka
akan ditampilkan manual dari perintah yang ditanyakan.
Manual perintah ditampilkan dalam bentuk yang telah ditata
menggunakan text formatter. Manual tersebut berisikan
informasi tentang:

a. Nama (name)
Nama perintah atau program dan keterangan singkat.

b. Tata kalimat (syntax)
Menguraikan tentang tata cara menggunakan perintah
UNIX. Keterangan yang diberi kurung siku atau '[]'
adalah pilihan atau option. Pada umumnya pilihan
didahului tanda minus.

Contoh:

translate [-f rules] [-d] file [output-file]

Perintah ini dapat digunakan sebagai berikut:

translate source
translate -f myrules source
translate -d source
translate source destination
translate -f myrules -d source destination

c. Deskripsi (description)
Menguraikan aksi dari perintah tersebut, termasuk di
dalamnya adalah penjelasan dari masing-masing
pilihan dan parameternya.

d. Lihat juga (see also)
Acuan ke perintah lain.

e. File-file
Merupakan daftar file yang menjalankan perintah.
File-file ini mungkin sebagai subyek dari perintah.

f. Catatan (Notes)
Komentar-komentar mengenai keterbatasan atau bahaya-
bahaya dari penggunaan perintah ini.

g. Kesalahan (Bugs)
Berisi daftar kesalahan yang telah diketahui di
dalam program.

Beberapa UNIX menggunakan perintah help untuk
menampilkan pertolongan. Program help lebih cepat dari pada
man dalam menampilkan pertolongan karena help tidak
menggunakan text formatter. Pada umumnya help menampilkan
tata kalimat perintah atau program dan sebaris penjelasan
tentang pilihan.

$ help more

more:

MORE - View File by Screenful or by Line

$ more [options] [files]
Options:
+ /pat start two lines beforeline containing pat
-c redraw page on line at a time
-d prompt after Screenfull
-f count by newlines instead of screen lines
-l treat formfeed (^L) as ordinary character
-n window size (default set with stty)
+n start viewing file at line n
-r display control character as ^C
-s reduce multiple blank lines to one
-u suppress terminal underlining or enhancing
-w prompt before exiting (any key terminates)
? or h show summary of more commands
$

(Bersambung)
HAK CIPTA OLEH VLSM PEMULA 2000 ,http://www.pemula.com
Repost: Denny Yerianto

Pengantar UNIX SYSTEM

1.1 MENGENAL UNIX

Dibanding dengan sistem operasi yang lain, mungkin UNIX
bukan yang terbaik. Akan tetapi sebagian besar sistem
operasi non-UNIX itu hanya untuk komputer tertentu. Suatu
aplikasi yang dirancang pada sistem operasi tertentu tidak
dapat dengan mudah dioperasikan pada komputer dengan sistem
operasi yang berbeda.
Ketergantungan terhadap komputer tertentu dirasakan
kurang menguntungkan oleh pihak pemakai. Pada umumnya
pemakai menginginkan suatu sistem yang dapat mengoperasikan
perangkat lunak yang standar pada perangkat keras dari
berbagai vendor yang saling bersaing.
UNIX saat ini tengah memasuki proses penyempurnaan
untuk memenuhi kebutuhan standar itu. Dari pihak vendor baik
di Amerika, Eropa maupun Asia menyadari bahwa UNIX memberi
standar dunia yang memungkinkan pemakai menghindari
ketergantungan terhadap vendor tertentu. Dan standarisasi
sistem operasi berbasis UNIX yang ada saat ini berkembang
untuk mendukung terbentuknya lingkungan komputasi sistem
terbuka (open system computing).


1.2 STRUKTUR DAN KEMAMPUAN UNIX

UNIX adalah sistem operasi komputer. Yang dimaksud
dengan sistem operasi komputer adalah program yang berguna
untuk mengendalikan sistem komputer. Sistem operasi akan
mengalokasikan sumber daya komputer dan penjadualan proses.
Sumber daya dapat berupa :

- waktu CPU
- memory
- disk
- tape
- printer
- terminal
- modem
- piranti lain yang dihubungkan dengan komputer.

Sistem operasi juga merupakan penghubung antara pemakai
dengan perangkat keras dan memberikan cara bagaimana pemakai
melakukan akses pada sumber daya komputer tersebut. Hubungan
antara pemakai, sistem operasi dan perangkat keras
digambarkan pada gambar 1.1 sebagai berikut:




+-----------------------+
| pemakai |
+-----------------------+
| sistem operasi |
+-----------------------+
| perangkat keras |
+-----------------------+

Gambar 1.1 Sistem Operasi


Pada mulanya UNIX dikembangkan di komputer besar,
namun kini banyak pula terdapat pada komputer sedang bahkan
komputer mikro.
Struktur sistem UNIX terdiri dari beberapa bagian.
Untuk memudahkan dalam menerangkan struktur UNIX, maka
sistem UNIX akan diuraikan menjadi beberapa lapisan.
Lapisan-lapisan tersebut digambarkan sebagai berikut:


+---------------------------+
| s h e l l <----------- Bourne Shell | ................... | C shell awk --------------> Utilitas . | Korn Shell
grep | . +-------------+ . |
make | . | Kernel | . |
cp | . | +---------+ | . |
... | . | | h/w <-------------- Komputer
| . | | sistem | | . | Printer
| . | +---------+ | . | Disk
| . +-------------+ . | Tape
| ................... | ...
| |
+---------------------------+

Gambar 1.2 Sistem UNIX



a. Lapisan yang paling dalam adalah komputer dan
piranti pendukungnya, seperti disk, tape, printer
dan lain-lain. Ini semua disebut perangkat keras
sistem.

b. Di seputar perangkat keras tersebut terdapat
sejumlah program yang menangani secara detail
seperti sumber daya komputer, mengorganisir sistem
file, mengurus disk dan tape. Pengoperasian yang
dilakukannya sangat detil sehingga tidak perlu
diketahui oleh pemakai. Lapisan ini kita sebut
kernel. Kernel merupakan otak dari otak dari sistem
operasi.

c. Kernel menyediakan lapis dukungan, yaitu berupa
program utilitas. Utilitas berfungsi untuk melakukan
akses sistem bagi pemakai. Utilitas-utilitas yang
agak sederhana dapat dikombinasikan dengan memakai
fasilitas pemipaan.

d. Lapis terluar dari sistem UNIX adalah shell. Shell
merupakan penghubung antara pemakai dan sistem. Bila
pemakai mengetikkan sebuah perintah, shell
menerjemahkan perintah tersebut dan mengatakan
kepada kernel apa yang harus dilakukan.
Sesungguhnya shell merupakan bagian dari utilitas.
Namun karena kerumitannya dan fungsinya yang sedikit
unik, maka shell cenderung dianggap sebagai lapis
terpisah.

Kemampuan-kemampuan yang dimiliki oleh UNIX antara lain
sebagai berikut:

o Multiuser
Sistem dapat digunakan oleh lebih dari satu orang
pada satu saat. Tentunya untuk melakukan hal ini
harus digunakan lebih dari satu terminal yang
dihubungkan. Selanjutnya, kita dapat memakai file,
program bahkan piranti-piranti yang terhubung dengan
komputer secara bersama.

o Multitasking
Sistem dapat melakukan beberapa tugas atau proses
pada waktu yang bersamaan. Dengan demikian sesorang
dapat memiliki satu proses yang sedang berkomunikasi
langsung dengan terminal, tetapi juga memiliki proses
lain dengan prioritas yang lebih rendah.

o Sistem File
Organisasi file di UNIX memiliki struktur pohon
(tree) yang terdiri dari file dan direktori. Struktur
tersebut diawali oleh akar (root) sebagai awal dari
seluruh direktori yang ada. Karakteristik dari
sistem file UNIX antara lain:

- konsisten dalam memproses data dan peralatan
- pertumbuhan file dan direktori secara dinamis
- dilengkapi dengan proteksi

o Shell
Shell merupakan antar muka pemakai dengan sistem
UNIX. Shell memiliki kemampuan menterjemahkan
perintah-perintah untuk dilaksanakan oleh kernel
UNIX. Disamping itu, shell memiliki kemampuan sebagai
bahasa pemrograman.

o Utilitas-utilitas
UNIX memiliki lebih dari 200 utilitas yang dapat
digunakan untuk mengelola sistem. UNIX memiliki
sejumlah utilitas yang agak sederhana yang dapat
dikombinasikan dengan memakai pipa dan filter.
o Surat Elektronik
UNIX dilengkapi dengan fasilitas untuk pengiriman
surat antar pemakai di lingkungan sistem UNIX.

o Konsep Perangkat Keras
Perangkat keras yang terhubung pada sistem UNIX akan
dianggap sebagai file biasa. UNIX tidak membedakan
antara perangkat keras dan file biasa. UNIX mengenal
keyboard sebagai masukan standard dan layar terminal
sebagai keluaran standard.

o Komunikasi antar Proses
keluaran dari suatu proses dapat diproses langsung
oleh proses lainnya (lihat bab 4).

o Jaringan
Pemakai UNIX dapat berhubungan dengan pemakai lain
dalam satu komputer (hubungan antar terminal).
Disamping itu pemakai UNIX juga dapat berkomunikasi
dengan pemakai lain pada komputer lainnya dalam satu
jaringan lokal atau LAN. Bahkan pemakai UNIX dapat
berhubungan dengan pemakai lain pada jaringan lain
dalam lingkup jaringan luas atau WAN. Data ditransfer
dari PC ke UNIX, UNIX ke UNIX dan UNIX ke mesin atau
komputer lain melalui:

- kabel komunikasi langsung RS232 (serial comm)
- ethernet
- dial up modem, leased line, public switched data
network.

o Keamanan
UNIX menyediakan fasilitas keamanan untuk pemakai
biasa, pengembang sistem, dan administrator sistem
serta jaringan sistem. Proteksi dilakukan melalui
password (login), perijinan file dan direktori,
enkripsi data, usia password otomatis, shell terbatas
dan identifikasi jaringan.


1.3 SEJARAH UNIX

Sistem operasi UNIX mulai dibuat pada tahun 1969. Pada
waktu itu Ken Tompson dan kawan-kawan sekerjanya khususnya
Dennis Ritchie dan Joseph Ossanna dari Laboratorium Bell,
yang merupakan bagian dari AT&T (American Telephone and
Telegraph), sedang mengerjakan proyek MULTICS. MULTICS
adalah singkatan dari MULTIplexed Information and Computing
Systems, namun beberapa orang ada yang mengartikan sebagai
Many Unnecessarily Large Tables In Core Simultaneously.
Setelah MULTICS selesai, muncul beberapa kejanggalan dan
dinilai kurang ramah dengan lingkungan komputer yang ada.
Kemudian mereka memutuskan untuk membuat sistem operasi
baru. Namun Ken tidak ingin menulis keseluruhan dari awal,
mereka melanjutkan dan memodifikasi beberapa kemampuan yang
ada pada MULTICS.
Nama UNIX itu sendiri berasal dari kata UNICS yaitu
Uniplexed Information and Computing Systems, yang dicetuskan
oleh Brian Kernighan pada tahun 1970. Saat itu UNIX masih
ditulis dalam bahasa assembly untuk komputer DEC PDP 7.
Pada tahun yang sama, UNIX berhasil pula
diimplementasikan pada komputer DEC PDP-11/20. Waktu itu
yang pertama kali menggunakan UNIX adalah kantor
Laboratorium Bell, yaitu untuk sistem pengolahan teks.
Kantor ini tercatat sebagai pemakai UNIX yang pertama di
dunia.
UNIX terus berkembang dan beberapa fasilitas pendukung
pemakai mulai dilengkapi, seperti fasilitas pengeditan dan
pemformatan. Akhirnya pada tahun 1971 lahirlah UNIX versi
pertama.
Pada musim panas 1973 UNIX ditulis kembali dalam bahasa
C. Pada saat itu kernel UNIX, yaitu inti sistem operasi yang
mengatur keseluruhan proses termasuk masukan dan keluaran,
terdiri atas 10.000 baris program C dan sekitar 1000 baris
program assembly. Dengan menggunakan bahasa C, sistem
operasi ini menjadi lebih mudah dimengerti dan dikembangkan.
UNIX yang dikeluarkan pada tahun 1973 disebut UNIX versi 4.
Jumlah pemakai UNIX di Laboratorium Bell bertambah
banyak dan dukungan pengembangan semakin dibutuhkan. Untuk
itu dibentuk dua kelompok peneliti lain di Laboratorium
Bell. Pada perkembangan selanjutnya ternyata kedua kelompok
ini saling bersaing.
Kelompok pertama dikenal dengan nama PWB (Programmer's
Workbench). Kelompok ini dipimpin oleh Rudd Canaday. Mereka
pada dasarnya disamping memberi dukungan juga mengembangkan
UNIX khususnya untuk perangkat lunak-perangkat lunak besar.
Hasil kerjanya yang pertama diberi nama PWB/UNIX 1.0
Kelompok kedua diberi nama USG (UNIX Suport Group).
Mula-mula kelompok ini hanya menyediakan dukungan saja,
namun selanjutnya kelompok ini mencoba membuat beberapa
versi UNIX untuk kebutuhan sendiri. Mereka memperkenalkan
versi terbarunya yang diberi nama MERT (Multi Environtment
Real-Time). MERT ini sama dengan konsep mesin virtual.
Pada tahun 1974 UNIX versi 5 dikeluarkan. Versi ini
secara resmi dibuat untuk tujuan pendidikan. UNIX versi
inilah yang diajarkan di berbagai universitas. Konon
harganya sangat murah sekali.
UNIX semakin populer setelah Laboratorium Bell
mengeluarkan UNIX versi 6 pada bulan Mei 1975. Versi ini
merupakan versi pertama yang dapat diperoleh kalangan luar
Laboratorium Bell dengan membayar royalti. Hal ini
menyebabkan banyak institusi lain yang ikut mengembangkan
UNIX, antara lain Rand, BBN (Bolt Beranek and Newman),
Universitas Illinois, Harvard, Purdue dan Universitas
California di Berkeley. Pengembangan yang paling potensial
adalah yang dilakukan oleh Universitas California Barkeley.
Versi yang dikeluarkan diberi nama UNIX versi BSD (Berkeley
Software Distributions).
UNIX versi 7 dikeluarkan pada tahun 1979 dengan
dilengkapi kompiler C dan sebuah shell yang diberi nama
Bourne shell. Sifat portabilitas mulai didapat pada UNIX
versi ini. Versi ini merupakan basis bagi semua pengembangan
sistem UNIX yang bersifat komersial.
Pada awal tahun 80-an, SCO (The Santa Cruz Operation)
bekerja sama dengan Microsoft mengimplementasikan UNIX pada
Intel 8086 dan beberapa mikroprosesor lainnya. Versi UNIX
ini dikenal dengan nama SCO XENIX. Saat ini XENIX sudah
sangat populer di kalangan pemakai UNIX di komputer mikro.
Persaingan antara kelompok USG dan PWB berakhir pada
tahun 1982. Mereka bergabung menjadi USDL (Unix System
Development Laboratory) dan memperkenalkan UNIX system III.
UNIX system V baru muncul pada tahun 1983 oleh AT&T
Information System. Versi inilah yang paling banyak beredar
sampai saat ini disamping UNIX versi BSD. UNIX system V ini
mencakup beberapa kemampuan dari BSD, seperti editor vi dan
C shell.
Dengan demikian kronologis pengembangan UNIX yang telah
diuraikan di atas dapat dirinci sebagai berikut:

1969 UNIX lahir pada PDP-7
1971 UNIX Versi 1, pada DEC PDP-11/20
1973 UNIX Versi 4, dalam bahasa C
dibentuk kelompok PWB dan USG
1974 UNIX Versi 5, untuk pendidikan
1975 UNIX Versi 6, disebar ke litbang Universitas
timbul versi BSD
1979 UNIX Versi 7, portable dan dilengkapi dengan
kompiler C dan Bourne Shell
1982 UNIX System III, Gabungan PWB dan USG
1983 UNIX System V, ditambahkan versi BSD
seperti vi dan C shell


1.4 TENTANG BUKU INI

1.4.1 Tata Cara Penulisan Huruf

Dalam buku ini, kami menyajikan beberapa jenis huruf.
Secara umum tata cara penulisan huruf yang digunakan dalam
buku ini adalah sebagai berikut:
a. Teks biasa
Disamping digunakan untuk bacaan biasa, jenis huruf
ini digunakan untuk memperlihatkan keluaran atau
response dari sistem.

b. Huruf miring
Digunakan untuk nama file atau istilah asing. Jika
huruf miring tersebut di letakkan di dalam tanda
kurung maka diartikan sebagai komentar atau
penjelasan dari operasi yang tengah dilakukan (tidak
terlihat pada layar terminal sistem).

c. Huruf tebal
Digunakan untuk menandakan masukan yang diketikkan
oleh pemakai yang akan dikirim ke dalam sistem.
d. Karakter ^
Digunakan untuk perintah penekanan tombol kontrol
pada keyboard yang diikuti oleh huruf lain.
Misalnya:

^H penekanan kontrol H
^D penekanan kontrol D
^C penekanan kontrol C

Awas, ^H tidak sama dengan penekanan tombol ^ dan
tombol H !

e. Karakter $
Digunakan sebagai tanda prompt atau menyatakan
bahwa shell telah siap menerima perintah yang akan
dikirim ke dalam sistem.

f. Huruf tebal bergaris bawah
Digunakan untuk menandakan bahwa karakter-karakter
tersebut merupakan masukan yang diketikkan oleh
pemakai namun hasil ketikannya tidak ditampilkan ke
layar terminal.

Untuk lebih jelasnya, maka perhatikan contoh-contoh
berikut ini:

Login: denny
Password : yerianto (yerianto tak terlihat mata!)

$ ls
bin
data
program
rahasia
tmp
$

Kata Login dan Password merupakan keluaran sistem. Kata
denny merupakan masukan dari pemakai. Kata yerianto
merupakan masukan yang diketikkan oleh pemakai namun hasil
ketikkannya tidak ditampilkan pada layar terminal. Kalimat
(yerianto tak terlihat mata!) merupakan penjelasan terhadap
operasi yang tengah dilakukan. Karakter $ merupakan prompt
UNIX, yaitu UNIX yang menggunakan Bourne shell, yang berarti
bahwa UNIX siap menerima perintah yang akan dikirm ke dalam
sistem. Kemudian kata ls merupakan perintah yang diketikkan
melalui terminal oleh pemakai yang selanjutnya oleh shell
akan dikirim ke dalam sistem. Hasil operasi perintah yang
dimasukkan ditampilkan ke layar sebagai keluaran sistem,
seperti terlihat yaitu bin, data, program, rahasia dan tmp.
Selanjutnya shell siap menerima perintah berikutnya, hal ini
ditandai dengan karakter $.



1.4.2 Apa saja yang akan dipelajari

Akan memberikan tuntunan praktis untuk bekerja di
dalam UNIX. Tuntunan diberikan melalui uraian-uraian singkat
dengan dilengkapi contoh-contoh yang bervariasi dan disertai
beberapa contoh kasus.
Secara Umum materi yang tercakup di dalam ini
adalah sebagai berikut:

Bab 1 : Sekilas tentang kemampuan dan perkembangan
sistem operasi UNIX.
Bab 2 : Pengertian rekening pemakai, password dan
prosedur penggunaan UNIX.
Bab 3 : Konsep file dan direktori serta operasi
yang berhubungan dengan keduanya.
Bab 4 : Konsep proses dan hubungan antar proses,
seperti pemipaan, filter dan pengalihan
arah masukan dan keluaran.
Bab 5 : Utilitas-utilitas UNIX seperti grep, sort
cut, cmp, diff, find dan lain-lain.
Bab 6 : Penggunaan editor teks UNIX, seperti vi,
ex dan sed.
Bab 7 : Pengertian tentang shell dan teknik
pemrogramannya.
Bab 8 : Fasilitas untuk melakukan komunikasi antar
pemakai di dalam sistem.

Materi ini menyajikan materi tentang UNIX system V. Namun
demikian, tidak menutup kemungkinan dapat digunakan pada
UNIX versi BSD karena dasar-dasar UNIX-nya tidak jauh
berbeda. (Bersambung)
HAK CIPTA OLEH VLSM PEMULA 2000, www.pemula.com
BY : Denny Yerianto