SEnukeX SEO Software

Sunday, June 12, 2011

DASHBOARD AND VISUALIZATION

 

PENDAHULUAN

Ketika pertama sekali mendengar kata “dashboard”, maka langsung terfikir adalah mobil. Kenapa mobil? Karena mobil mempunyai dashboard.jawaban yang simple tetapi tidak menyelesaikan permasalahan.pernahkah kita pergi kekantor polisi, lalu melihat layar yang biasanya tergantung dinding,atau pernahkan kita menonton acara televisi tentang laporan cuaca.tentunya sangat familiar sekali.

Dari beberapa ilustrasi diatas, dapatlah disimpulkan bahwa dashboard adalah satu tool yang berfungsi menyajikan suatu data secara berkala baik dalam satuan detik ataupun lainnya. Jika diibaratkan dengan speedometer mobil, maka speedometer tersebut menampilkan kondisi mesin setiap detiknya, mulai dari kecepatan, RPM,suhu mesin,kapasitas tangki bensin,dll. Begitu pula dashboard yang kita kenal dalam istilah data atau yang lebih identik dengan Businees Intelligent (BI).

Dashboard di BI menyajikan suatu informasi dari data suatu perusahaan ataupun organisasi.dashboard bisa menyajikan suatu lapioran  dari fungsi waktu, dari mulai satuan waktu hingga abad.

FUNGSI DASHBOARD         

Visualisasi data adalah salah satu tujuan dari dashboard, bisa kita bayangkan jika di suatu organisasi (contoh:retail) mempunyai data penjualan yang banyak , bertumpuk dan dalam bentuk laporan kertas.betapa bosannya melihat data  yang cukup menggunung tersebut.

Seiring dengan berkembangnya teknologi, dashboard bukan hanya bisa ditampilkan sekedar bentuk grafis.melainkan bisa tabel, gis (map), gauge, dll.

DASHBOARD YANG BAIK                            

Saat ini telah banyak vendor yang menawarkan berbagai macam dashboard untuk kebutuhan penyajian data, baik yang bersifat operasional, tactical, maupun startegic. Tetapi, tidak semua dashboard yang ditawarkan merupakan dashboard yang efektif. Dashboard yang efektif adalah dashboard yang mampu memberikan pemahaman kepada penggunanya tentang informasi yang disampaikan hanya dengan sekali lihat saja. Sementara, kebanyakan dashboard yang ditawarkan vendor masih mementingkan atau mengedepankan tampilan dari dashboard tersebut, meskipun sebenarnya tidak semua komponen yang ditampilkan memberikan kejelasan informasi atau bahkan tidak memiliki guna sama sekali.

Dashboard yang dibuat harus mampu untuk menampilkan data yang diinginkan secar tepat, artinya dashboard mampu meyampaikan informasi yang paling penting bagi perusahaan berkaitan dengan tujuan dari dashboard tersebut. Oleh karena itu, pembuatan dashboard harus diperhatikan baik dari segi desain, komponen yang dipakai, hingga peletakan tiap-tiap komponen pada dashboard. Kesemuanya itu, untuk mencapai tujuan utama dari pengimpementasian dashboard, yaitu menyajikan dan memberikan informasi kepada pengguna secara cepat, tepat, dan mudah dipahami.

Seperti yang sudah disinggung sebelumnya, untuk membuat dashboard yang baik perlu diperhatikan hal-hal yang ada pada dashboard, yaitu:

Desain

Desain dashboard haruslah simple, tetapi tetap menarik dan yang terpenting adalah menonjolkan informasi utama (informasi yang paling kritis) yang ingin disampaikan kepada pengguna. Dashboard yang hanya memiliki banyak komponen, tetapi tidak dapat menonjolkan informasi yang krusial, tidak akan bermanfaat bagi perusahaan. Desain dashboard tidak boleh mengalihkan perhatian pengguna dari poin penting dashboard, yaitu informasi yang disajikan oleh dashboard.

Pemilihan komponen

Pemilihan komponen pada dashboard haruslah sesuai dengan data yang akan disampaikan. Meskipun kerap ditemukan bahwa satu komponen dapat digunakan untuk menyajikan berbagai macam jenis informasi, tetapi suatu komponen akan lebih powerfull apabila digunakan untuk menyajikan data yang sesuai/ pas dengan karakerisitk dari komponen tersebut. Misal, penggunaan grafik batang untuk menyajikan informasi berdasar waktu.

Pengunaan warna

Penggunaan warna pada dashboard haruslah sesuai dengan arti dari warna tersebut. Atau sesuai dengan pemahaman umum yang mengenai warna tersebut. Misal, penggunaan warna merah pada dial chart menunjukkan bahwa kondisi sedang dalam keadaan gawat, dan tanda hijau menunjukkan kondisi dalam keadaan baik.

Penempatan komponen (locating)

Peletakan tiap-tiap komponen harus terurut. Dari yang komponen utama hingga komponen pendukung. Komponen utama diletakkan di tempat yang mudah untuk dilihat, tempat yang pertama kali dilihat oleh pengguna sehingga informasi akan langsung tersampaikan kepada pengguna. Sementara komponen pendukung diletakkan dengan menyesuaikan komponen utama.

KOMPONEN DAN CONTOH DASHBOARD

 

Pada saat ini terdapat banyak perangkat lunak yang mampu menyajikan dashboard,baik berbasis desktop,web maupun mobile.penyajian dashboard sebaiknya disesuaikan dengan kebutuhan perusahaan atau organisasi.pemilihan warna yang baik juga merupakan salah satu kunci utama agar yang melihat tidak merasa bosan dan jenuh dengan tampilan.

Biasanya perusahaan atau organisasi yang berskala menengah keatas lebih cendrung memilih perangkat lunak yang berlisensi dan resmi.lain halnya dengan developer yang lebih cenderung memilih aplikasi yang berlisensi open source.ada juga web developer yang membuat dashboard sendiri dengan menggunakan bahasa pemograman web.

Tampilan 3D adalah salah satu bentuk dashboard yang paling banyak diminati selain bentuknya yang mewah, biasanya dashboard menyajikan data berdimensi lebih dari 1.beberapa komponen yang biasanya terdapat didalam dashboard,seperti:

  • CHART / GRAPH

Salah satu komponen yang biasanya terdapat didalam sebuah dashboard.berbentuk persegi panjang yang biasanya berbentuk vertikal atau horizontal.chart / graph disajikan dengan satu sumbu yang mengandung measure.


          chart example 1

Terdapat banyak jenis chart/graph,seperti pie chart, multiseries bar, donuts bar,line chart,dll.jenis-jenis tersebut bisa ditampilkan dengan kebutuhan data.

  • GAUGE

Berbentuk seperti speedometer, biasanya akan berubah sesuai dengan arah kursor.gauge sendiri bekerja berdasarkan data yang ada pada chart lainnya,ketika kursor digerakan pada chart tertentu, maka gauge akan mengikutinya.

 




  • CROSS TAB

Seperti halnya pada sebuah browser, jika pengguna membuka banyak halaman web,maka browser akan mengisntruksikan membuka tab/frame lain, begitu pula  didalam dashboard biasanya terdapat tab,tab tersebut bisanya berisi kategori yang bisa dilihat

  • TOP CATEGORIES

Berisi laporan yang bisa diakses secara cepat. Top categories biasanya bekerja dengan yang sering dibuka oleh pengguna atau yang menjadi trending topic.

 

 

 

TC Example

  1. MAP

Dashboard yang biasanya berbasis GIS (Geographic Information System) lebih sering menggunakannya.tujuannya untuk mengetahui detil suatu wilayah,atau langsung mengetahui letak suatu wilayah tertentu.

                              Google Map

 

Biasanya lebih sering menggunakan Google Map yang berbasis API.sehingga developer bisa merubah sesuai dengan kebutuhan lain. Contoh lainnya adalah StatPlanet yang menggunakan flash dan xml sebagai penghubung database dengan web interface.

Stat planet

 

  1. TOOLTIP

Tooltip adalah pesan yang disampaikan ketika mouse berada disuatu area tertentu. Umumnya tooltip mengandung ringkasan terhadap informasi dari area yang diarahkan kursor.tooltip pada dashboard biasnya lebih sering dilihat pada penggunaan GoogleMaps sebagai salah satu komponennya.

                                                                                                tooltip 1

http://www.ilmuwebsite.com/wp-content/uploads/2010/07/normals_tooltip.png

 

Setelah mengenal beberapa komponen dashboard,dibawah ini terdapat beberapa contoh dashboard dan penerapannya dibisnis tertentu.



 

 

 

 

 

 

Description: http://blog.ub.ac.id/syahdeini/files/2010/10/database-tips.gif

         


FINANCIAL ANALYSIS DASHBOARD

 

FINANCIAL ANALYSIS DASHBOARD 1

http://dashboardsbyexample.com/wp-content/uploads/2008/10/xcelsius-dashboard-total-cost-of-ownership.png

Bentuknya yang simple dan kaku menjadikan dashboard keuangan tersebut terlihat membosan. Namun dari sisi penyajian data dinilai sudah cukup memberikan informasi yang cukup lengkap.perpaduan Gauge dan Single Series Chart sudah cukup untuk melaporkan analisa keuangan.bentuk gauge yang disajikan cukup berbeda dari mulai yang berjarum seperti jam hingga seperti busur dan juga meteran yang bisa diubah.

 

 

 

 

Desain

 

warna

 

Pemilihan komponen

 

Penempatan komponen (locating)

 

Detail

 

 

 

*Skala 1-10

BAR CHART

 

LINE CHART

 

PIE CHART

 

COLUMN CHART

 

DONUTS CHART

 

GAUGE

 

MAP

 

CATEGORIES

 

3D

 

*☑ dan ×

 

 

 

 

 

DASHBOARD FOR SOCIAL NETWORKING

DASHBOARD FOR SOCIAL NETWORKING 1

http://data-to-dashboard.com/wp-content/uploads/2009/12/Social-Media-Marketing-Dashboard.JPG

Dashboard diatas dikeluarkan oleh http://www.unilyzer.com untuk keperluan analisa minat pemakai internet untuk mengunjungi website tertentu yang berbasis jejaring social. Bentuknya yang mini dan cenderung sempit seolah memberi kesan terlalu sempit. Namun hal tersebut bisa ditepis dengan perpaduan warna yang elegan dan juga memberikan kesan modern.dashboard tersebut juga mampu menampilkan KPI. Sehingga dari segi kelengkapan data sudah cukup memadai untuk dianalisa.

 

 

 


Blogged with the Flock Browser

Sunday, January 16, 2011

History of Fiber Optics Technology


In 1880 Alexander Graham Bell invented a light communications system called photo-phone using sunlight reflected from a voice-modulated thin mirror to bring the conversation. Photo-phone never achieved commercial success, although the system is working quite well. Here are some of the stages of historical development of optical fiber technology:

1.      First generation Instance (starting 1970)
System is still simple and the basis for the next generation system consists of:
Encoding: Changing input (eg voice) into electrical signals.Transmitter: Changing the electrical signals into modulated light wave, a LED with a wavelength of 0.87 μm. Silica Fibers: As an introduction to waves of light.Repeater: For a light wave amplifier which weakened on the road
Receiver: Change the modulated light waves into electrical signals, a photo-detector
Decoding: Changing the electrical signals into output (eg voice). Repeater works by converting light waves into electrical signals and then amplified electronically and converted back into light waves. In 1978 the transmission capacity can reach 10 Gb.km / s.
2.       Second generation (beginning in 1981)
To reduce the effect of dispersion, fiber core size minimized. The refractive index of the skin was made in close with the core refractive index. Using a laser diode, the emitted wavelength 1.3 μm. Transmission capacity to 100 Gb.km / s.
3.        Third generation (starting 1982)
Completion of the manufacture of silica fibers. Making a laser diode chip wavelength 1.55 μm.
Improved purity silica material so that transparency can be made for a wavelength of about 1.2 μm to 1.6 μm  Transmission capacity into several hundred Gb.km / s
4.        Fourth geneartion (starting 1984)
Commencement of research and development of a coherent system, rather than modulating the intensity modulation, but frequency modulation. In 1984 its capacity has been able to equal the capacity of a direct detection system (intensity modulation). Hampered its development because of technological tools and the source of the frequency modulation detection is still far behind.
5.       Fifth generation (beginning in 1989)
Developed an optical amplifier repeater function which replaces the previous generations.
In the early development of transmission capacity is only achieved 400 Gb.km / s but a year later the transmission capacity has penetrated 50,000 Gb.km / s!
6.       Top-Six generation?
In 1988 Linn F. Mollenauer pioneered optical soliton communication systems. Soliton is a pulse wave that consists of many components of different wavelengths and also varies only slightly in intensity. Soliton length is only 10 -12 seconds and can be divided into several components that are close together, so that the signals in the form of solitons is information that consists of multiple channels at once (wavelength division multiplexing). We experimentally demonstrated that solitons can carry a minimum of 5 channels, each of which carries information at a rate of 5 Gb / s. Transmission capacity has been tested 35,000 Gb.km / s. The workings of this system is the effect of Kerr solitons, ie the rays will travel the same wavelength at different rates within a material when its intensity exceeds a limit price. This effect is then used to neutralize the effects of dispersion, so that the soliton does not widen at a time until the receiver. This is very advantageous because the resulting error rate is very small and even negligible.



Although the light propagates along the fiber core without the layer of leather material, but the skin has several functions:
- Reduce the loss of light from the core to the surrounding air.
- Reduce the scattering loss at the core surface.
- Protects the fiber from contamination of surface absorption.
- Increasing the mechanical strength.
If the difference in the refractive index of the core and made drastic skin called the optical fiber Step index (SI), the difference between skin and core refractive index is symbolized by Δ, where:


For additional protection, leather wrapped by an additional layer (made of certain types of plastic) which is a coat or a buffer to protect the optical fiber from physical damage.Buffer is elastic, prevent abrasion and prevent loss due to scattering microbends.

2.flow of Fiber Optic Light Inside

The concept of propagation of light in optical fibers, can be reviewed by two approaches / theories of geometric optics in which light rays are seen as fulfilling the laws of geometric light (reflection and refraction) and physical optics in which light is seen as an electro-magnetic waves (mode theory) . Overview of Geometric Optics  Gives a clear picture of the propagation of light along optical fibers. Two types of rays can propagate along optical fibers where the light rays propagate meridian cuts the optical fiber axis and the skew ray in which the rays do not propagate through the fiber optic axis. Meridian-ray beam can be classified into bound and unbound rays. Bound rays in optical fiber due to total reflection, in which order these events occur then the beam entering the fiber core must be cut border skin with a greater angle than the critical angle, the EC, so that light can propagate along the fiber.

Overview of physical optics
Approach as a ray of light just to explain how the direction of a plane wave propagating in a fiber but does not review other properties of plane waves of interference, in which the plane waves interfere with each other along the propagation, so that only the types of certain plane waves which can propagate along the fiber . It would require a review of physical optics is looking at light as an electromagnetic wave is called the theory of modes.
The theory used to explain the mode in addition to the types of plane waves which can propagate along the fiber, also for explaining the properties of optical fibers such as absorption, attenuation and dispersion.
Mode is a "configuration of light propagation in optical fibers that provide the transverse electric field distribution in a stable (unchanged throughout the propagation of light in the direction of the axis) so that light can be guided in the fiber optics" (Introduction To Optical Fiber Communication, Yasuharu Suematsu, Ken - Ichi Iga). Collection of electromagnetic waves guided in the optical fiber are called modes.
View mode theory of light as a plane wave which is expressed in the direction, amplitude and wavelength of perambatannya. Plane wave is a wave surface (which on the surface of this phase of his constant, called a wavefront) is an infinite flat plane perpendicular to the direction of propagation. Relationships wavelength, propagation speed and wave frequency in a medium.


Why is fiber optic system is said to revolutionize the world telekomunikiasi? is because compared with the conventional system using metal wires (copper) used, the optical fiber having:

Less expensive - Several miles of optical cable can be made cheaper than copper wires of equal length.

Thinner - Optical fibers can be made with smaller diameter (the size of the skin of the fiber diameter about 100 μm and total diameter coupled with a protective jacket around 1-2 mm) than copper wires, and also because the optical fiber carrying light (light) then it certainly has a light weight (reduced weight). So fiber-optic cables take a smaller place in the soil.

Higher carrying capacity - Because optical fibers are thinner than copper wires then most of the optical fiber can be bundled into a cable with a certain diameter of the multiple telephone lines may be on the same cable or more channels on cable TV can be through cable. Fiber optics also has a large bandwidth (1 and 100 GHz, for multimode and single-mode along the 1 km).

Less signal degradation - The signal loss in optical fibers is smaller (less than 1 dB / km at a wide range of wavelengths) as compared with copper wire.

Message Origin
Message origin can be a non-electric physical quantities (sound or picture), so that the necessary transducers (sensors) that alter message from form to form a non-electric power.
A common example is a microphone to change sound waves into electrical currents and video cameras (CCD) transforms the image into electrical current.

Modulator and Carrier Source
Have two main functions, the first electrically changing message into a form suitable, both laid it on the signal generated by carrier wave source.
Modulation formats can be differentiated into analog and digital modulation.
In digital modulation for laying the digital data signal on a carrier wave, the modulator simply just to on his or her right off the carrier signal source according to his data.
Carrier sourc membangkitkankan light waves, which are commonly used Laser Diode (LD) or Light Emitting Diode (LED).

Channel Coupler
To channel the power of light waves that have been modulated from the carrier source to the information channel (fiber optics).
Is an important part of the design of optical fiber communication systems because the possibility of loss is high.

Information Channel (Fibre Optics)
Desirable characteristics of optical fibers is attenuation and low-angle light-cone of acceptance.
Amplifier connections required at the very long (hundreds or thousands of kilometers) in order to have sufficient power to the receiver.
Repeaters can be used only for the digital system, which serves to change the weak optical signal into electrical form and then strengthened and restored to form an optical signal for subsequent transmission.
Time propagation of light in an optical fiber depends on the frequency of light and the path through which, the signal light propagating in optical fibers have the different frequencies within a certain range (the width of the frequency spectrum) and powernya divided over different paths, different, this causes a distortion in the signal.
In digital systems this distortion in the form of widening (dispersion) of digital pulses that propagate in the fiber optics, is increasingly widening with increasing distance traveled and the widening of this will overlap with other pulses, it will cause errors in signal detection. The existence of dispersion limit the speed of information (on speed digital information system called the data rate measured in bits per second (bps)) that can be delivered.
On the phenomenon of optical solitons, dispersion effect is balanced by nonlinear effects of optical fibers so that the pulse signal can propagate without changing shape (not dilated).

Detector and Amplifier
Used photo-detectors (photo-diode, photo transistor, etc.) that serves to change the received optical signals into electrical signals.

Signal Processor
For analog transmission, the signal processor consists of strengthening and signal filtering. Filtering aims to maximize the ratio of signal power to signal power that is not diinginakan. Random fluctuations that exist in the received signal is referred to as noise. How does this noise on the communication system is determined by the amount of SNR (Signal to Noise Ratio), the ratio of signal power to noise power, usually expressed in desi-Bell (dB), the greater the SNR the better the quality of the communication system to noise.
For digital systems, signal processor consists of strengthening and filtering the signal and sets of decision makers.
The series of these decision makers to decide whether a binary 0 or 1 is received during the time slot of each individual bit. Because of the noise that can not be eliminated then there is always the possibility of errors of this decision-making process, expressed in magnitude Bit Error Rate (BER) that its value should be small in communication.
If the data is transmitted is an analog (eg voice), but is transmitted digitally over fiber optics (the transmitter is required Analog to Digital Converter (ADC) before incoming signal modulator) is also required Digital to Analog Converter (DAC) to signal processor, to transform digital data into analog, prior to release to the output (eg speaker).


Message Output
If the resulting output are presented directly to the people, who hear or see such information, then the output is still in the form of electrical signals to be converted into sound waves or visual image. Transducer (actuator) for this are the speakers for the audio message and a cathode ray tube (CRT) (or others such as LCD, OLED, etc.) for the visual image.
In some situations such as in systems in which computers or other machines connected together via a fiber optic system, then the output in the form of electrical signals can directly be used. This is also when the optical fiber system is only part of a larger network, as in a fiber link between the telephone exchange or a fiber trunk line carrying a number of television programs, in this case includes the distribution of processing electrical signals to certain goals desired. Equipment at the ouput message is simple only in the form of an electrical connector to the signal processor the next system.

History of Fiber Optics Technology


In 1880 Alexander Graham Bell invented a light communications system called photo-phone using sunlight reflected from a voice-modulated thin mirror to bring the conversation. Photo-phone never achieved commercial success, although the system is working quite well. Here are some of the stages of historical development of optical fiber technology:

1.      First generation Instance (starting 1970)
System is still simple and the basis for the next generation system consists of:
Encoding: Changing input (eg voice) into electrical signals.Transmitter: Changing the electrical signals into modulated light wave, a LED with a wavelength of 0.87 μm. Silica Fibers: As an introduction to waves of light.Repeater: For a light wave amplifier which weakened on the road
Receiver: Change the modulated light waves into electrical signals, a photo-detector
Decoding: Changing the electrical signals into output (eg voice). Repeater works by converting light waves into electrical signals and then amplified electronically and converted back into light waves. In 1978 the transmission capacity can reach 10 Gb.km / s.
2.       Second generation (beginning in 1981)
To reduce the effect of dispersion, fiber core size minimized. The refractive index of the skin was made in close with the core refractive index. Using a laser diode, the emitted wavelength 1.3 μm. Transmission capacity to 100 Gb.km / s.
3.        Third generation (starting 1982)
Completion of the manufacture of silica fibers. Making a laser diode chip wavelength 1.55 μm.
Improved purity silica material so that transparency can be made for a wavelength of about 1.2 μm to 1.6 μm  Transmission capacity into several hundred Gb.km / s
4.        Fourth geneartion (starting 1984)
Commencement of research and development of a coherent system, rather than modulating the intensity modulation, but frequency modulation. In 1984 its capacity has been able to equal the capacity of a direct detection system (intensity modulation). Hampered its development because of technological tools and the source of the frequency modulation detection is still far behind.
5.       Fifth generation (beginning in 1989)
Developed an optical amplifier repeater function which replaces the previous generations.
In the early development of transmission capacity is only achieved 400 Gb.km / s but a year later the transmission capacity has penetrated 50,000 Gb.km / s!
6.       Top-Six generation?
In 1988 Linn F. Mollenauer pioneered optical soliton communication systems. Soliton is a pulse wave that consists of many components of different wavelengths and also varies only slightly in intensity. Soliton length is only 10 -12 seconds and can be divided into several components that are close together, so that the signals in the form of solitons is information that consists of multiple channels at once (wavelength division multiplexing). We experimentally demonstrated that solitons can carry a minimum of 5 channels, each of which carries information at a rate of 5 Gb / s. Transmission capacity has been tested 35,000 Gb.km / s. The workings of this system is the effect of Kerr solitons, ie the rays will travel the same wavelength at different rates within a material when its intensity exceeds a limit price. This effect is then used to neutralize the effects of dispersion, so that the soliton does not widen at a time until the receiver. This is very advantageous because the resulting error rate is very small and even negligible.



Although the light propagates along the fiber core without the layer of leather material, but the skin has several functions:
- Reduce the loss of light from the core to the surrounding air.
- Reduce the scattering loss at the core surface.
- Protects the fiber from contamination of surface absorption.
- Increasing the mechanical strength.
If the difference in the refractive index of the core and made drastic skin called the optical fiber Step index (SI), the difference between skin and core refractive index is symbolized by Δ, where:


For additional protection, leather wrapped by an additional layer (made of certain types of plastic) which is a coat or a buffer to protect the optical fiber from physical damage.Buffer is elastic, prevent abrasion and prevent loss due to scattering microbends.

2.flow of Fiber Optic Light Inside

The concept of propagation of light in optical fibers, can be reviewed by two approaches / theories of geometric optics in which light rays are seen as fulfilling the laws of geometric light (reflection and refraction) and physical optics in which light is seen as an electro-magnetic waves (mode theory) . Overview of Geometric Optics  Gives a clear picture of the propagation of light along optical fibers. Two types of rays can propagate along optical fibers where the light rays propagate meridian cuts the optical fiber axis and the skew ray in which the rays do not propagate through the fiber optic axis. Meridian-ray beam can be classified into bound and unbound rays. Bound rays in optical fiber due to total reflection, in which order these events occur then the beam entering the fiber core must be cut border skin with a greater angle than the critical angle, the EC, so that light can propagate along the fiber.

Overview of physical optics
Approach as a ray of light just to explain how the direction of a plane wave propagating in a fiber but does not review other properties of plane waves of interference, in which the plane waves interfere with each other along the propagation, so that only the types of certain plane waves which can propagate along the fiber . It would require a review of physical optics is looking at light as an electromagnetic wave is called the theory of modes.
The theory used to explain the mode in addition to the types of plane waves which can propagate along the fiber, also for explaining the properties of optical fibers such as absorption, attenuation and dispersion.
Mode is a "configuration of light propagation in optical fibers that provide the transverse electric field distribution in a stable (unchanged throughout the propagation of light in the direction of the axis) so that light can be guided in the fiber optics" (Introduction To Optical Fiber Communication, Yasuharu Suematsu, Ken - Ichi Iga). Collection of electromagnetic waves guided in the optical fiber are called modes.
View mode theory of light as a plane wave which is expressed in the direction, amplitude and wavelength of perambatannya. Plane wave is a wave surface (which on the surface of this phase of his constant, called a wavefront) is an infinite flat plane perpendicular to the direction of propagation. Relationships wavelength, propagation speed and wave frequency in a medium.


Why is fiber optic system is said to revolutionize the world telekomunikiasi? is because compared with the conventional system using metal wires (copper) used, the optical fiber having:

Less expensive - Several miles of optical cable can be made cheaper than copper wires of equal length.

Thinner - Optical fibers can be made with smaller diameter (the size of the skin of the fiber diameter about 100 μm and total diameter coupled with a protective jacket around 1-2 mm) than copper wires, and also because the optical fiber carrying light (light) then it certainly has a light weight (reduced weight). So fiber-optic cables take a smaller place in the soil.

Higher carrying capacity - Because optical fibers are thinner than copper wires then most of the optical fiber can be bundled into a cable with a certain diameter of the multiple telephone lines may be on the same cable or more channels on cable TV can be through cable. Fiber optics also has a large bandwidth (1 and 100 GHz, for multimode and single-mode along the 1 km).

Less signal degradation - The signal loss in optical fibers is smaller (less than 1 dB / km at a wide range of wavelengths) as compared with copper wire.

Message Origin
Message origin can be a non-electric physical quantities (sound or picture), so that the necessary transducers (sensors) that alter message from form to form a non-electric power.
A common example is a microphone to change sound waves into electrical currents and video cameras (CCD) transforms the image into electrical current.

Modulator and Carrier Source
Have two main functions, the first electrically changing message into a form suitable, both laid it on the signal generated by carrier wave source.
Modulation formats can be differentiated into analog and digital modulation.
In digital modulation for laying the digital data signal on a carrier wave, the modulator simply just to on his or her right off the carrier signal source according to his data.
Carrier sourc membangkitkankan light waves, which are commonly used Laser Diode (LD) or Light Emitting Diode (LED).

Channel Coupler
To channel the power of light waves that have been modulated from the carrier source to the information channel (fiber optics).
Is an important part of the design of optical fiber communication systems because the possibility of loss is high.

Information Channel (Fibre Optics)
Desirable characteristics of optical fibers is attenuation and low-angle light-cone of acceptance.
Amplifier connections required at the very long (hundreds or thousands of kilometers) in order to have sufficient power to the receiver.
Repeaters can be used only for the digital system, which serves to change the weak optical signal into electrical form and then strengthened and restored to form an optical signal for subsequent transmission.
Time propagation of light in an optical fiber depends on the frequency of light and the path through which, the signal light propagating in optical fibers have the different frequencies within a certain range (the width of the frequency spectrum) and powernya divided over different paths, different, this causes a distortion in the signal.
In digital systems this distortion in the form of widening (dispersion) of digital pulses that propagate in the fiber optics, is increasingly widening with increasing distance traveled and the widening of this will overlap with other pulses, it will cause errors in signal detection. The existence of dispersion limit the speed of information (on speed digital information system called the data rate measured in bits per second (bps)) that can be delivered.
On the phenomenon of optical solitons, dispersion effect is balanced by nonlinear effects of optical fibers so that the pulse signal can propagate without changing shape (not dilated).

Detector and Amplifier
Used photo-detectors (photo-diode, photo transistor, etc.) that serves to change the received optical signals into electrical signals.

Signal Processor
For analog transmission, the signal processor consists of strengthening and signal filtering. Filtering aims to maximize the ratio of signal power to signal power that is not diinginakan. Random fluctuations that exist in the received signal is referred to as noise. How does this noise on the communication system is determined by the amount of SNR (Signal to Noise Ratio), the ratio of signal power to noise power, usually expressed in desi-Bell (dB), the greater the SNR the better the quality of the communication system to noise.
For digital systems, signal processor consists of strengthening and filtering the signal and sets of decision makers.
The series of these decision makers to decide whether a binary 0 or 1 is received during the time slot of each individual bit. Because of the noise that can not be eliminated then there is always the possibility of errors of this decision-making process, expressed in magnitude Bit Error Rate (BER) that its value should be small in communication.
If the data is transmitted is an analog (eg voice), but is transmitted digitally over fiber optics (the transmitter is required Analog to Digital Converter (ADC) before incoming signal modulator) is also required Digital to Analog Converter (DAC) to signal processor, to transform digital data into analog, prior to release to the output (eg speaker).


Message Output
If the resulting output are presented directly to the people, who hear or see such information, then the output is still in the form of electrical signals to be converted into sound waves or visual image. Transducer (actuator) for this are the speakers for the audio message and a cathode ray tube (CRT) (or others such as LCD, OLED, etc.) for the visual image.
In some situations such as in systems in which computers or other machines connected together via a fiber optic system, then the output in the form of electrical signals can directly be used. This is also when the optical fiber system is only part of a larger network, as in a fiber link between the telephone exchange or a fiber trunk line carrying a number of television programs, in this case includes the distribution of processing electrical signals to certain goals desired. Equipment at the ouput message is simple only in the form of an electrical connector to the signal processor the next system.

History of Fiber Optics Technology







In 1880 Alexander Graham Bell invented a light communications system called photo-phone using sunlight reflected from a voice-modulated thin mirror to bring the conversation. Photo-phone never achieved commercial success, although the system is working quite well. Here are some of the stages of historical development of optical fiber technology:



1.       First generation Instance (starting 1970)
System is still simple and the basis for the next generation system consists of:
Encoding: Changing input (eg voice) into electrical signals.Transmitter: Changing the electrical signals into modulated light wave, a LED with a wavelength of 0.87 μm. Silica Fibers: As an introduction to waves of light.Repeater: For a light wave amplifier which weakened on the road
Receiver: Change the modulated light waves into electrical signals, a photo-detector
Decoding: Changing the electrical signals into output (eg voice). Repeater works by converting light waves into electrical signals and then amplified electronically and converted back into light waves. In 1978 the transmission capacity can reach 10 Gb.km / s.

2.       Second generation (beginning in 1981)
To reduce the effect of dispersion, fiber core size minimized. The refractive index of the skin was made in close with the core refractive index. Using a laser diode, the emitted wavelength 1.3 μm. Transmission capacity to 100 Gb.km / s.

3.        Third generation (starting 1982)
Completion of the manufacture of silica fibers. Making a laser diode chip wavelength 1.55 μm.
Improved purity silica material so that transparency can be made for a wavelength of about 1.2 μm to 1.6 μm  Transmission capacity into several hundred Gb.km / s

4.        Fourth geneartion (starting 1984)
Commencement of research and development of a coherent system, rather than modulating the intensity modulation, but frequency modulation. In 1984 its capacity has been able to equal the capacity of a direct detection system (intensity modulation). Hampered its development because of technological tools and the source of the frequency modulation detection is still far behind.

5.       Fifth generation (beginning in 1989)
Developed an optical amplifier repeater function which replaces the previous generations.
In the early development of transmission capacity is only achieved 400 Gb.km / s but a year later the transmission capacity has penetrated 50,000 Gb.km / s!

6.       Top-Six generation?
In 1988 Linn F. Mollenauer pioneered optical soliton communication systems. Soliton is a pulse wave that consists of many components of different wavelengths and also varies only slightly in intensity. Soliton length is only 10 -12 seconds and can be divided into several components that are close together, so that the signals in the form of solitons is information that consists of multiple channels at once (wavelength division multiplexing). We experimentally demonstrated that solitons can carry a minimum of 5 channels, each of which carries information at a rate of 5 Gb / s. Transmission capacity has been tested 35,000 Gb.km / s. The workings of this system is the effect of Kerr solitons, ie the rays will travel the same wavelength at different rates within a material when its intensity exceeds a limit price. This effect is then used to neutralize the effects of dispersion, so that the soliton does not widen at a time until the receiver. This is very advantageous because the resulting error rate is very small and even negligible.



Although the light propagates along the fiber core without the layer of leather material, but the skin has several functions:
- Reduce the loss of light from the core to the surrounding air.
- Reduce the scattering loss at the core surface.
- Protects the fiber from contamination of surface absorption.
- Increasing the mechanical strength.
If the difference in the refractive index of the core and made drastic skin called the optical fiber Step index (SI), the difference between skin and core refractive index is symbolized by Δ, where:


For additional protection, leather wrapped by an additional layer (made of certain types of plastic) which is a coat or a buffer to protect the optical fiber from physical damage.Buffer is elastic, prevent abrasion and prevent loss due to scattering microbends.

2.flow of Fiber Optic Light Inside

The concept of propagation of light in optical fibers, can be reviewed by two approaches / theories of geometric optics in which light rays are seen as fulfilling the laws of geometric light (reflection and refraction) and physical optics in which light is seen as an electro-magnetic waves (mode theory) . Overview of Geometric Optics  Gives a clear picture of the propagation of light along optical fibers. Two types of rays can propagate along optical fibers where the light rays propagate meridian cuts the optical fiber axis and the skew ray in which the rays do not propagate through the fiber optic axis. Meridian-ray beam can be classified into bound and unbound rays. Bound rays in optical fiber due to total reflection, in which order these events occur then the beam entering the fiber core must be cut border skin with a greater angle than the critical angle, the EC, so that light can propagate along the fiber.


Overview of physical optics Approach as a ray of light just to explain how the direction of a plane wave propagating in a fiber but does not review other properties of plane waves of interference, in which the plane waves interfere with each other along the propagation, so that only the types of certain plane waves which can propagate along the fiber . It would require a review of physical optics is looking at light as an electromagnetic wave is called the theory of modes. The theory used to explain the mode in addition to the types of plane waves which can propagate along the fiber, also for explaining the properties of optical fibers such as absorption, attenuation and dispersion. Mode is a "configuration of light propagation in optical fibers that provide the transverse electric field distribution in a stable (unchanged throughout the propagation of light in the direction of the axis) so that light can be guided in the fiber optics" (Introduction To Optical Fiber Communication, Yasuharu Suematsu, Ken - Ichi Iga). Collection of electromagnetic waves guided in the optical fiber are called modes. View mode theory of light as a plane wave which is expressed in the direction, amplitude and wavelength of perambatannya. Plane wave is a wave surface (which on the surface of this phase of his constant, called a wavefront) is an infinite flat plane perpendicular to the direction of propagation. Relationships wavelength, propagation speed and wave frequency in a medium. Why is fiber optic system is said to revolutionize the world telekomunikiasi? is because compared with the conventional system using metal wires (copper) used, the optical fiber having: Less expensive - Several miles of optical cable can be made cheaper than copper wires of equal length. Thinner - Optical fibers can be made with smaller diameter (the size of the skin of the fiber diameter about 100 μm and total diameter coupled with a protective jacket around 1-2 mm) than copper wires, and also because the optical fiber carrying light (light) then it certainly has a light weight (reduced weight). So fiber-optic cables take a smaller place in the soil. Higher carrying capacity - Because optical fibers are thinner than copper wires then most of the optical fiber can be bundled into a cable with a certain diameter of the multiple telephone lines may be on the same cable or more channels on cable TV can be through cable. Fiber optics also has a large bandwidth (1 and 100 GHz, for multimode and single-mode along the 1 km). Less signal degradation - The signal loss in optical fibers is smaller (less than 1 dB / km at a wide range of wavelengths) as compared with copper wire.Message Origin Message origin can be a non-electric physical quantities (sound or picture), so that the necessary transducers (sensors) that alter message from form to form a non-electric power. A common example is a microphone to change sound waves into electrical currents and video cameras (CCD) transforms the image into electrical current.Modulator and Carrier Source Have two main functions, the first electrically changing message into a form suitable, both laid it on the signal generated by carrier wave source. Modulation formats can be differentiated into analog and digital modulation. In digital modulation for laying the digital data signal on a carrier wave, the modulator simply just to on his or her right off the carrier signal source according to his data. Carrier sourc membangkitkankan light waves, which are commonly used Laser Diode (LD) or Light Emitting Diode (LED).Channel Coupler To channel the power of light waves that have been modulated from the carrier source to the information channel (fiber optics). Is an important part of the design of optical fiber communication systems because the possibility of loss is high.Information Channel (Fibre Optics) Desirable characteristics of optical fibers is attenuation and low-angle light-cone of acceptance. Amplifier connections required at the very long (hundreds or thousands of kilometers) in order to have sufficient power to the receiver. Repeaters can be used only for the digital system, which serves to change the weak optical signal into electrical form and then strengthened and restored to form an optical signal for subsequent transmission. Time propagation of light in an optical fiber depends on the frequency of light and the path through which, the signal light propagating in optical fibers have the different frequencies within a certain range (the width of the frequency spectrum) and powernya divided over different paths, different, this causes a distortion in the signal. In digital systems this distortion in the form of widening (dispersion) of digital pulses that propagate in the fiber optics, is increasingly widening with increasing distance traveled and the widening of this will overlap with other pulses, it will cause errors in signal detection. The existence of dispersion limit the speed of information (on speed digital information system called the data rate measured in bits per second (bps)) that can be delivered. On the phenomenon of optical solitons, dispersion effect is balanced by nonlinear effects of optical fibers so that the pulse signal can propagate without changing shape (not dilated).Detector and Amplifier Used photo-detectors (photo-diode, photo transistor, etc.) that serves to change the received optical signals into electrical signals.Signal Processor For analog transmission, the signal processor consists of strengthening and signal filtering. Filtering aims to maximize the ratio of signal power to signal power that is not diinginakan. Random fluctuations that exist in the received signal is referred to as noise. How does this noise on the communication system is determined by the amount of SNR (Signal to Noise Ratio), the ratio of signal power to noise power, usually expressed in desi-Bell (dB), the greater the SNR the better the quality of the communication system to noise. For digital systems, signal processor consists of strengthening and filtering the signal and sets of decision makers. The series of these decision makers to decide whether a binary 0 or 1 is received during the time slot of each individual bit. Because of the noise that can not be eliminated then there is always the possibility of errors of this decision-making process, expressed in magnitude Bit Error Rate (BER) that its value should be small in communication. If the data is transmitted is an analog (eg voice), but is transmitted digitally over fiber optics (the transmitter is required Analog to Digital Converter (ADC) before incoming signal modulator) is also required Digital to Analog Converter (DAC) to signal processor, to transform digital data into analog, prior to release to the output (eg speaker).Message Output If the resulting output are presented directly to the people, who hear or see such information, then the output is still in the form of electrical signals to be converted into sound waves or visual image. Transducer (actuator) for this are the speakers for the audio message and a cathode ray tube (CRT) (or others such as LCD, OLED, etc.) for the visual image. In some situations such as in systems in which computers or other machines connected together via a fiber optic system, then the output in the form of electrical signals can directly be used. This is also when the optical fiber system is only part of a larger network, as in a fiber link between the telephone exchange or a fiber trunk line carrying a number of television programs, in this case includes the distribution of processing electrical signals to certain goals desired. Equipment at the ouput message is simple only in the form of an electrical connector to the signal processor the next system.

Tuesday, January 11, 2011

Panja Mafia Pemilu makin Mengarah ke Andi Nurpati


Headline News / Polkam / Selasa, 12 Juli 2011 22:30 WIB

Metrotvnews.com, Jakarta: Rapat kerja Panitia Kerja DPR tentang Mafia Pemilu dengan Badan Pengawas Pemilu (Bawaslu) dan Komisi Pemilihan Umum (KPU), Selasa (12/7) malam, berakhir. Temuan hasil rapat semakin mengerucutkan pada nama Andi Nurpati sebagai orang yang paling berperan dalam pemalsuan surat keputusan Mahkamah Konstitusi. Surat palsu keputusan MK itu menetapkan Dewi Yasin Limpo sebagai pemenang pemilihan anggota legislatif dari daerah pemilihan (Dapil) I Sulawesi Selatan.

Reporter Metro TV Rori Asyarie, di Gedung DPR/MPR, melaporkan, temuan dalam rapat seharian yang mengerucut pada nama Andi Nurpati adalah soal rapat pleno KPU tanggal 21 Agustus 2009. Saat itu, menurut staf KPU Syahrudin, Andi Nurpati lah yang membacakan surat keputusan MK yang belakangan diketahui palsu itu.

Menurut Syahrudin yang juga diperkuat Kepala Biro Teknis KPU, surat MK palsu tertanggal 14 Agustus 2009, itu tidak ditunjukkan dan tidak dikonsultasikan terlebih dulu ke komisioner KPU yang lain. Surat MK palsu itu kemudian tersimpan di Biro Hukum KPU hingga rapat pleno lanjutan pada 2 September 2000.

Ketidaktahuan komisioner KPU lain soal surat yang dibacakan Andi itulah yang dipertanyakan anggota Panja Mafia Pemilu. Diduga kuat surat itu sengaja disimpan oleh Biro Hukum KPU atas perintah Andi.

Temuan lainnya dalam rapat kerja Panja Mafia Hukum hari ini adalah soal rapat konsolidasi sebelum rapat pleno KPU tanggal 21 Agustus 2009. Dalam rapat konsolidasi yang tak disebutkan tanggalnya tersebut, Andi Nurpati memutuskan adanya penambahan suara untuk calon legislatif Partai Hanura dari Dapil I Sulsel, yakni Dewi Yasin Limpo.

Atas temuan baru itu, Wakil Ketua Panja Ganjar Pranowo berani menyimpulkan bahwa Panja berkeyakinan soal keterlibatan Andi Nurpati dalam pemalsuan surat MK itu. Yang lebih meyakinkan Panja, menurut Ganjar, Panja baru mengetahui bahwa surat itu baru diserahkan Andi Nurpati, beberapa hari, sebelum Andi menyatakan mundur dari KPU. Artinya itu tahun ini, 2011.

"Maka kita semakin meyakinkan saja, dalam seluruh rapat-rapat ini, kita semakin mengerucut, bahwa Bu Andi selalu menjadi tokoh sentral dalam seluruh pembuatan keputusan politik di KPU ini," jelas Ganjar.(DSY)


Saturday, January 1, 2011

Bismillah :sedikit celotehan:

tahun 2011 telah memasuki, usiaku sudah tidak tua lagi...
akhir semester hampir tiba didepan mata, tugas kuliah menumpuk sebanyak hardisk saya yang low space...
malam ini saya chat dengan dosen saya yang sedang kuliah S3 di italia, terus terang saya ingin banget kesana, ingin banget menuntut ilmu di negeri orang lain. ingin rasanya meraih beasiswa dan menjadi pemenang di dunia internasional.
namun apa daya, saat ini saya bingung dengan kemampuan saya yang pas-pasanini. ngoding setengah2, manajemen males mbaca, itung2an lancar klo lagi mud.
saya hanya bisa berusaha, berdoa dan menunggu hasil semoga hasil semester ini baik dan lulus tepat waktu abis tu kuliah di luar negeri.. amin...
sedikit tips dari dosen sya..
bljr yg rajin.. Tau cara, tujuan, dan alasan mempelajari sesuatu
Sm pertajam wawasan.. Insyallah bs
tau gmn caranya solve problem sm aplikasinya

amin...